User:Stever/oddsandends/2021
- Refinish the surface of the kitchen table Stever (talk) 17:40, 17 March 2021 (UTC)
- Adjust wood lathe table, add feet and wheels, lower table height, with JMF Stever (talk) 09:56, 7 April 2021 (BST)
- Change Z-axis motor on boxford Stever (talk) 22:07, 7 April 2021 (BST)
- Mount both wood lathes onto lathe table, adjust height, fit feet and wheels JMF & Stever (talk) 16:51, 13 April 2021 (BST)
- Fix main roller door Ru & Stever (talk) 16:51, 13 April 2021 (BST)
- Put down weedkiller on fire escape Stever (talk) 16:51, 20 April 2021 (BST)
- Fix limit switches to boxford Stever (talk) 16:51, 20 April 2021 (BST)
- Get second hot air reflow gun, 100W soldering iron, Reamer set Stever (talk) 23:08, 1 May 2021 (BST)
- Change filter on desoldering gun Stever (talk) 11:00, 2 May 2021 (BST)
- Sort inch-size drills for lathe, de-dupe, and sharpen Stever (talk) 14:30, 3 May 2021 (BST)
- Clean bearings, clean mechanisms, deburr upper guard support rail, adjust tracking and blade lead on bandsaw 17:09, 7 May 2021 (BST)
- Clean and overhaul feed mechanism on 0.4mm 3D printer 17:09, 7 May 2021 (BST)
- Design, build, install new rack for Ryobi tools in order to clear bench space 19:05, 9 May 2021 (BST)
- Make prototype drill speeds sticker 18:16, 11 May 2021 (BST)
- Change bandsaw blade (we're out, ordered more), clean saw, check and adjust alignment and blade lead 17:23, 20 May 2021 (BST)
- Make engraved brass plaque for the laser trophy 02:28, 23 May 2021 (BST)
- Fix head cooling fan on 0.6mm 3D printer 15:28, 1 June 2021 (BST)
- Fit safety NVR switch to polisher 19:29, 1 June 2021 (BST)
- Reorganise boxford storage cupboards and label 17:26, 4 June 2021 (BST)
- Sort out collet set for boxford and get replacements to complete the range 22:27, 8 June 2021 (BST)
- Change bandsaw blade, clean and lubricate, adjust alignment and blade lead 21:55, 16 June 2021 (BST)
- Change laser lens 21:55, 16 June 2021 (BST)
- Fit new pressure switch on compressor, check pipework, test pressure relief valve 12:37, 17 June 2021 (BST)
- Make, Fit drawers for Ryobi Rack 22:11, 22 June 2021 (BST)
- Fix light over front door 15:22, 29 June 2021 (BST)
- Fix gearing on pyramid bender 14:42, 1 July 2021 (BST)
- Make a cart for the new planer/thicknesser 14:55, 1 July 2021 (BST)
- Clean and service workshop A/C, wow... so much dust.... 08:33, 14 July 2021 (BST)
- Clean, re-wax and realign bandsaw table 09:54, 15 July 2021 (BST)
- Replace split section of extractor hose on table saw, replace paper filter element in dust extractor 14:04, 15 July 2021 (BST)
- Rebuild 3-jaw chuck 16:52, 26 July 2021 (BST)
- Replace bearings on Boxford, re-make missing parts, set up spindle and adjust, replace cooling fan 10:36, 30 July 2021 (BST)
- Make new drawer to hold air filters Stever (talk) 11:09, 16 August 2021 (BST)
- Make new no.12 for the Kitchen clock 18:11, 18 August 2021 (BST)
- Sort out weird artifacts on security cameras 4&6, loose connection on PSU. 05:59, 22 August 2021 (BST)
- Clear out debris from fire escape and apply weedkiller 10:10, 23 August 2021 (BST)
- Sort out repair of new air cleaner, install same 09:10, 26 August 2021 (BST)
- Fix hose adapter scheppach vacuum downstairs 13:49, 26 August 2021 (BST)
- Loaded new wire into EMP235ic welder 09:45, 30 August 2021 (BST)
- Order new hacksaw blades, check all saws and change where needed 18:21, 6 September 2021 (BST)
- Adjust spindle preload on Boxford by 20um 11:01, 20 September 2021 (BST)
- Fix wire brushes drawer that someone jammed 11:01, 20 September 2021 (BST)
- Make, install, stock "odd fasteners & Kits drawer" 11:01, 20 September 2021 (BST)
- Fix table saw blade lock mechanism by making a new lever for it 11:55, 27 September 2021 (BST)
- Fix stuck front door - Should investigate adding an external latch to the rear fire door. 11:55, 27 September 2021 (BST)
- Fit card reader built by James to the Metal Lathe 15:49, 29 September 2021 (BST)
- Reskim the tracking roller on the 1" linisher 21:27, 29 September 2021 (BST)
- Sharpen all woodworking chisels (not lathe ones) 17:06, 1 October 2021 (BST)
- Clean, Stone and wax table of planner/thicknesser 17:06, 1 October 2021 (BST)
- Change horizontal bandsaw blade, change bearings, realign blade and guides, change oil Stever (talk)
- Recut 3-jaw chuck on lathe Stever (talk) 16:02, 8 October 2021 (BST)
- Install new air duct on Planner/Thicknesser 16:47, 13 October 2021 (BST)
- Replace fan in left hand reflow gun 22:45, 14 October 2021 (BST)
- Make and fit Lathe chuck splash guard 16:16, 10 November 2021 (UTC)
- Full Audit of chemical cupboards, properly dispose of unregistered chemicals 16:19, 24 November 2021 (UTC)
- Fix Scheppach #1 dust collector, Faulty mains switch, repaired. 17:51, 24 November 2021 (UTC)
- Restock sandpaper supplies 20:36, 1 December 2021 (UTC)
- Make the 2021 rLab Xmas tree
- Clean, stone, rewax table on planner/thicknesser 16:21, 21 December 2021 (UTC)
- Fix induction heater by replacing main driver IGBTs 22:46, 29 December 2021 (UTC)