Tools/tablesaw
Record Power TS250-C Table Saw
This page has been noted as requiring attention to bring it up to the basic standard as per the guidance
Please remove this tag once this page has been improved that standard
 |
| Owing to it's dangerous nature, delicate nature, or expense, this tool requires that you be inducted on it's proper handling before use. |
Introduction[edit]
The Manual for the tablesaw is here. The table saw requires induction before you use it for the first time.
Current Status[edit]
| Date | Status | Comment |
|---|---|---|
| 27th January 2022 | Functional |
Planned Upgrades[edit]
Parts and upgrades that are planned/Budgeted/Purchased for in the near future
Record Power TS250-C Table Saw[edit]
Inductions[edit]
The following people are able to provide inductions on the Record table saw
| Name/Contact | Notes |
|---|---|
| Mark-M |
Maintainers[edit]
These are the people who look after and repair the Record table saw, they're the ones to contact if there's any problems with it
| Name | Notes |
|---|
Recent Changes[edit]
If you make any non-trivial changes to the Record table saw or perform maintenance please note it here, delete records older than 1 yr
- Replace blown fuse, advise user on proper loading levels to avoid it blowing again. Stever (talk) 17:10, 12 April 2022 (BST)
- Fit new 40T blade, looks like the 100T ones wear out far too fast so let's not get any more of those Stever (talk) 14:14, 21 February 2022 (UTC)
- Fit new feet Stever (talk) 22:35, 4 February 2022 (UTC)
- Fix failed table lock mechanism by re-making failed part Stever (talk) 17:58, 27 January 2022 (UTC)
- Clean and wax table Jmf (talk) 09:03, 29 December 2021 (UTC)
- Replaced blade Padski (talk) 20:55, 24 November 2021 (UTC)
- Fix blade lock mechanism by making a new lever Stever (talk) 11:54, 27 September 2021 (BST)
- Clean and wax table Jmf (talk) 11:10, 7 August 2021 (BST)
- Replace split section of extractor hose, replace paper filter element in dust extractor Stever (talk) 14:04, 15 July 2021 (BST)
- Clean and wax table Stever (talk) 18:58, 28 May 2021 (BST)
- Changed blade, Adjusted sliding table for chopping, Adjusted and straightened up side block for slicing, Dismantled and cleaned out blocked dust extractors, Adjusted and cut underlaying plastic blade/dust guard to fit, Changed plug fuse in combined power supply. Vidar Velle March 8th 2020
- Fitted double socket to allow proper use of dust extract Jmf (talk) 08:01, 7 July 2019 (UTC)
- Readjusted the sliding table. Vidar Valle 15th Feb 2018