User:Stever/oddsandends/pre2021

From rLab
  • Second 3D induction sticky Stever (talk) 14:13, 28 May 2019 (UTC)
  • Sort out power switch on router - No fault found, cleaned and returned to service Stever (talk) 15:04, 31 May 2019 (UTC)
  • Fixed materials test oven, fitted new fan and motor. Stever (talk) 18:05, 13 June 2019 (UTC)
  • Fitted dust cap for oven fan Stever (talk) 09:51, 14 June 2019 (UTC)
  • New "1" numeral for the kitchen clock Stever (talk) 12:26, 14 June 2019 (UTC)
  • Set up member's gallery display on big screen in main room. Stever (talk) 15:52, 27 June 2019 (UTC)
  • Fitted new LED lights in main upstairs room. Stever (talk) 07:44, 5 August 2019 (UTC)
  • Make storage drawer for linisher belts. Stever (talk) 10:24, 6 August 2019 (UTC)
  • Reinstate thermal safety system on the MIG welder. Stever (talk) 15:38, 11 August 2019 (UTC)
  • Fix random-orbital sander Stever (talk) 15:22, 28 August 2019 (UTC)
  • Fit new lathe toolpost, make new shadowboard and install. Stever (talk) 13:25, 30 August 2019 (UTC)
  • Fix Z-home function on the laser cutter. Stever (talk) 18:20, 4 September 2019 (UTC)
  • Fix belt tension retaining bolts on drill press Stever (talk) 16:33, 16 September 2019 (UTC)
  • Install new 0.4mm nozzle on 3D printer Stever (talk) 08:08, 19 September 2019 (UTC)
  • Fix blockage in laser air system and install new lens
  • Sharpen all the blunt drill bits Stever (talk) 10:10, 3 October 2019 (UTC)
  • Fix metal lathe powerfeed lever oil seal Stever (talk) 17:06, 23 October 2019 (UTC)
  • Fit a new blade on the bandsaw, fix blade tension scale, re-do tracking and blade lead. Stever (talk) 12:04, 28 October 2019 (UTC)
  • Deep clean Bandsaw and readjust blade tracking and lead Stever (talk) 11:23, 13 November 2019 (UTC)
  • Change air filters in downstairs air cleaner Stever (talk) 14:22, 20 November 2019 (UTC)
  • Fix broken clamp bar on bandsaw fence Stever (talk) 06:57, 23 November 2019 (UTC)
  • Made new laser focus block Stever (talk) 17:28, 3 December 2019 (UTC)
  • Fix contactor on large linisher Stever (talk) 07:36, 20 December 2019 (UTC)
  • Fit new wheels to the router table Stever (talk) 14:33, 12 January 2020 (UTC)
  • Reweld broken fence on large linisher Stever (talk) 15:17, 24 January 2020 (UTC)
  • Fix inverted blade on the bandsaw Stever (talk) 10:52, 27 January 2020 (UTC)
  • Fix blown resistors in resistance decade box Stever (talk) 13:43, 28 January 2020 (UTC)
  • Replace 440mA fuse in Aglient DMM Stever (talk) 13:43, 28 January 2020 (UTC)
  • Replace blown NTC inrush suppressor on 110V site transformer Stever (talk) 14:33, 4 February 2020 (UTC)
  • Replace blade on horizontal bandsaw, track, tension and align. Stever (talk) 14:31, 10 February 2020 (UTC)
  • Replace all guide bearings on bandsaw, re-engineer blade guide handle and bearing adjusters Stever (talk) 18:39, 14 February 2020 (UTC)
  • Unclog nozzle on desoldering gun Stever (talk) 18:39, 14 February 2020 (UTC)
  • Clean and re-condition the MT3 tapers on the drill press Stever (talk) 12:20, 18 February 2020 (UTC)
  • Fix Wikes angle grinder Stever (talk) 22:41, 20 February 2020 (UTC)
  • Replace forge burner Stever (talk) 07:03, 23 February 2020 (UTC)
  • Make new decorative panel for the scrap wood bin Stever (talk) 07:58, 3 March 2020 (UTC)
  • Help Andrew-J make and fit a new table for the small linsher and mini-mill Stever (talk) 07:58, 3 March 2020 (UTC)
  • Emergency fix for laser cutter to support NHS efforts Stever (talk) 21:36, 11 April 2020 (UTC)
  • Overhaul drill press (all apart from new bearings) Stever (talk) 14:10, 22 April 2020 (UTC)
  • Reorganize red desk Stever (talk) 15:40, 14 May 2020 (UTC)
  • Clean sink properly Stever (talk) 15:40, 14 May 2020 (UTC)
  • Clean and test fume hood Stever (talk) 15:40, 14 May 2020 (UTC)
  • Re-stick fire exit signs that were falling off Stever (talk) 15:40, 14 May 2020 (UTC)
  • Wash all overalls for downstairs and lathe dust sheet Stever (talk) 13:03, 20 May 2020 (UTC)
  • Put down weedkiller at front of building and in fire escape Stever (talk) 16:28, 20 May 2020 (UTC)
  • Replace break-glasses on fire alarm call points Stever (talk) 21:35, 27 May 2020 (UTC)
  • Complete cleaning of downstairs and checking over of all tools Stever (talk) 21:35, 27 May 2020 (UTC)
  • Cleaning of both toilets Stever (talk) 21:35, 27 May 2020 (UTC)
  • Fit new air assist system on laser Stever (talk) 06:23, 8 June 2020 (UTC)
  • Reinstall and recommission 3D printers Stever (talk) 06:23, 8 June 2020 (UTC)
  • Replace faulty regulator on air compressor Stever (talk) 17:19, 24 June 2020 (UTC)
  • Sanitise upstairs A/C unit Stever (talk) 11:04, 27 June 2020 (UTC)
  • Change lathe coolant Stever (talk) 08:07, 5 July 2020 (UTC)
  • Fix workshop emergency exit light (1 fixed, other still offline) Stever (talk) 16:51, 10 July 2020 (UTC)
  • Clean and sanitise fridge Stever (talk) 16:51, 10 July 2020 (UTC)
  • Fix emergency light over main workshop door Stever (talk) 09:44, 12 July 2020 (BST)
  • Change filter media in downstairs air filter Stever (talk) 10:15, 12 July 2020 (BST)
  • Patch up holes in fire-rated wall between workshop and store room Stever (talk) 09:44, 12 July 2020 (BST)
  • Get new laser printer installed and setup ready for use. Stever (talk) 12:49, 20 July 2020 (BST)
  • Build and install new PCs to replace design stations Stever (talk) 10:47, 30 August 2020 (BST)
  • Re-sharpen, demagnetise and sort all the blunt drill bits, refill drill index Stever (talk) 16:41, 17 September 2020 (BST)
  • Fix large linisher power switch, make and fit new dust extract for it Stever (talk) 15:12, 1 October 2020 (BST)
  • Replace laser cutter power switch for HV and air assist. Stever (talk) 18:32, 1 October 2020 (BST)
  • Re-Dress grinding wheels and affix warning label. Stever (talk) 16:27, 7 October 2020 (BST)
  • Sort out screws rack and organise a stock of nuts and bolts. Stever (talk) 13:09, 10 October 2020 (BST)
  • Create documentation for hardness tester Stever (talk) 09:00, 16 October 2020 (BST)
  • Fiddle with large linisher power switch (again), Still not sure what the problem is Stever (talk) 09:00, 30 October 2020 (UTC)
  • Install drawer rack on north wall support pillar Stever (talk) 09:00, 30 October 2020 (UTC)
  • Replace prefilter and main filter on workshop general dust extract unit Stever (talk) 17:50, 30 October 2020 (UTC)
  • Replace air cleaner filter Stever (talk) 14:20, 10 November 2020 (UTC)
  • Fit new bandsaw automatic dust extraction controller Stever (talk) 14:20, 10 November 2020 (UTC)
  • Refinish surface of woodworking table. Stever (talk) 14:20, 10 November 2020 (UTC)
  • Fix large linisher NVR switch (again) Hopefully permanently this time, if not them motor may need replacement. Stever (talk) 09:57, 16 November 2020 (UTC)
  • Restock eye wash stations Stever (talk) 07:08, 5 December 2020 (UTC)