Project/ElectricalWorks
Introduction
A page to track the electrical changes requested and made in rLab.
Any works carried out on the building electrical supply MUST be completed in accordance with the current version of the IET Requirements For Electrical Installations (the Electrical Regs) and by people who know what they are doing. This is one area where we do not simply 'hack the space' as the consequences of getting it wrong are too severe.
As data cabling often overlaps with the electrical installation, sharing trunking etc, it is also covered on this page.
If you have any projects that may need changes to the lab electrical system, please ask before you go ahead with the project. Anything unsafe will be removed without notice.
Planned Projects
- Fit new overhead lighting for the kitchen table
- Main Room re-work project - Power for the west wall, and the 3d printers
- Test and sort out the emergency lighting
- Install new emergency lighting for the Laser Room and back stairs
- Sort out the main distribution boards
- Tidy up the data rack
- Put in a fused outlet for the Workshop air cleaner
- Document the different distribution boards
- Install worklight for the wood lathe
- Install extractor fan for the Workshop
- Connect up extractor fan in toilet
- Move upstairs lights onto the Kitchen board
Completed Projects
- Rewire Laser room. Install data cabling to both walls
- Replace Workshop extension leads with durable, 13a rated leads suitable for a workshop environment
- Install new sub-board in the Kitchen for upstairs power
- Install new circuits in the Kitchen for the fridge, microwave, dishwasher etc
- Remove old circuit from the building signage - we don't have an illuminated sign
- Install new lighting in Kitchen. Ceiling lights and under-cupboard lighting
- Re-fit LoRaWAN gateway with power feed to upstairs cupboard
- Replace UPS for the 3d printers - need to support a second printer
- Replace batteries in data rack UPS
- Install new radial circuit in the upstairs cupboard for fume extract and future data closet
- Replace Workshop fluorescent tubes with LED low energy tubes
- Replace Bay fluorescent lights with LED low energy lights
- Install new ring main in the Workshop for the east wall, plus data cabling. Add points for lathe worklight and extractor fan
- Tidy up old power and data cabling between Main room and Workshop
- Replace Main room fluorescent lights with LED ceiling panels
- Install new ring main for the electronics benches, plus data cabling
- Remove wall-mounted extension leads from Workshop and fit metal-clad sockets on the ring main
- Install 16A extention socket from bandsaw to center pillar for MIG welder use
- Tidy up power for the Workshop inspection microscope
- Replace Laser room fluorescent lights with LED ceiling panels
- Replace Lobby fluorescent lights with LED ceiling panel
- Install frost protection heaters in both toilets
- Install fused outlet in Workshop for the auto dust extractor on the bandsaw
Reference Information
-
Main electrical panel
-
Building 125A incoming feed
-
Isolation switch
-
Main 3-phase board - Main supplies for the lab
-
Main electrical panel
-
Single phase sub-board DB1A - emergency stop circuits in the Workshop
-
Board DB1A
-
Single phase sub-board DB2A - Upstairs and heat pumps
-
Board DB2A
-
3-phase sub-board DB3A - Workshop tools
-
Workshop emergency stop contactor and reset switch
-
Emergency stop reset switch
-
3-phase sockets
-
Emergency Lighting test switches
-
Kitchen Board
Distribution Board Schedules
Circuit | Type | Rating | Curve | Icn | Make | Notes |
---|---|---|---|---|---|---|
1L1 | MCB | 6A | B | 10K | Merlin Gerin | Lobbby Lights |
1L2 | MCB | 10A | B | 10K | Merlin Gerin | Loading Bay Lights |
1L3 | MCB | 6A | B | 10K | Merlin Gerin | Mezanine Lights (Laser Room) |
2L1 | MCB | 10A | C | 10K | Merlin Gerin | Toilet Frost protection heaters |
2L2 | MCB | 20A | B | 10K | Merlin Gerin | Unknown |
2L3 | MCB | 15A | B | 10K | Merlin Gerin | Data Rack |
3L1 | Not fitted | |||||
3L2 | MCB | 15A | B | 10K | Merlin Gerin | Fire Alarm |
3L3 | MCB | 16A | B | 10K | Merlin Gerin | Emergency Stop Loop |
4 | MCB | 15A | B | 6K | Merlin Gerin | 3-phase, Feed for DB3A, Drill Press & Grinder |
5 | MCB | 20A | B | 10K | Merlin Gerin | 3-phase, Metal Lathe |
6L1 | MCB | 10A | B | 10K | Merlin Gerin | Workshop Lights |
6L2 | MCB | 32A | B | 6K | Merlin Gerin | Main Room Sockets |
6L3 | MCB | 50A | B | 10K | Merlin Gerin | Feed to DB1A, Workshop sockets |
Circuit | Type | Rating | Curve | Icn | Make | Notes |
---|---|---|---|---|---|---|
1 | 30mA RCBO | 32A | C | 10K | MEM | North and West Wall sockets |
2 | 30mA RCBO | 32A | C | 10K | MEM | Sockets on pillars |
3 | 30mA RCBO | 32A | C | 10K | MEM | East Wall sockets |
4 | 30mA RCBO | 16A | C | 10K | MEM | Bandsaw (shared with 16A Welder socket) |
Circuit | Type | Rating | Curve | Icn | Make | Notes |
---|---|---|---|---|---|---|
1 | MCB | 40A | B | 6K | MK | Water Heater |
2 | MCB | 16A | B | 6K | MK | Not used |
3 | MCB | 20A | C | 6K | Chint | Upstairs heatpump |
4 | MCB | 32A | B | 6K | MK | Not used |
5 | MCB | 32A | B | 6K | MK | Not used |
6 | MCB | 50A | B | 6K | MK | Feed for Kitchen board |
7 | MCB | 16A | C | 6K | Chint | Kitchen and Workshop heat pumps |
8 | MCB | 16A | B | 6K | MK | Not used |
9 | MCB | 6A | B | 6K | MK | Main Room lights |
10 | MCB | 6A | B | 6K | MK | Not used |
Circuit | Type | Rating | Curve | Icn | Make | Notes |
---|---|---|---|---|---|---|
1 | MCB | 40A | B | 6K | BG | Not used |
2 | MCB | 32A | B | 6K | BG | Kitchen Sockets |
3 | MCB | 32A | B | 6K | BG | Laser Room Sockets |
4 | MCB | 16A | B | 6K | BG | Server closet |
5 | MCB | 6A | B | 6K | BG | Not used (Main Room lights) |
6 | MCB | 32A | B | 6K | BG | (For Main Room Sockets) |
7 | MCB | 32A | B | 6K | BG | Electronics Benches |
8 | MCB | 16A | B | 6K | BG | Fridge |
9 | MCB | 6A | B | 6K | BG | Not used (Laser Room Lights) |
10 | MCB | 6A | B | 6K | BG | Kitchen Lights |