Tools/tablesaw: Difference between revisions
Content added Content deleted
imported>Stever |
imported>Stever No edit summary |
||
| Line 29: | Line 29: | ||
|- |
|- |
||
! Name/Contact !! Notes |
! Name/Contact !! Notes |
||
|- |
|||
| [[User:LukeB|Luke-B]] || Taking a break from rLab at the moment |
|||
|- |
|- |
||
| [[User:Stever|Steve-R]] || |
| [[User:Stever|Steve-R]] || |
||
| Line 42: | Line 40: | ||
|- |
|- |
||
! Name !! Notes |
! Name !! Notes |
||
|- |
|||
| [[User:LukeB|Luke-B]] || Taking a break from rLab at the moment |
|||
|- |
|- |
||
| [[User:Stever|Steve-R]] || |
| [[User:Stever|Steve-R]] || |
||
| Line 51: | Line 47: | ||
If you make any non-trivial changes to the Record table saw or perform maintenance please note it here, delete records older than 1 yr |
If you make any non-trivial changes to the Record table saw or perform maintenance please note it here, delete records older than 1 yr |
||
* Replace split section of extractor hose, replace paper filter element in dust extractor [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 14:04, 15 July 2021 (BST) |
|||
* Clean and wax table [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 18:58, 28 May 2021 (BST) |
* Clean and wax table [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 18:58, 28 May 2021 (BST) |
||
* Changed blade, Adjusted sliding table for chopping, Adjusted and straightened up side block for slicing, Dismantled and cleaned out blocked dust extractors, Adjusted and cut underlaying plastic blade/dust guard to fit, Changed plug fuse in combined power supply. Vidar Velle March 8th 2020 |
* Changed blade, Adjusted sliding table for chopping, Adjusted and straightened up side block for slicing, Dismantled and cleaned out blocked dust extractors, Adjusted and cut underlaying plastic blade/dust guard to fit, Changed plug fuse in combined power supply. Vidar Velle March 8th 2020 |
||
Revision as of 13:04, 15 July 2021
Record Power TS250-C Table Saw
This page has been noted as requiring attention to bring it up to the basic standard as per the guidance
Please remove this tag once this page has been improved that standard
 |
| Owing to it's dangerous nature, delicate nature, or expense, this tool requires that you be inducted on it's proper handling before use. |
Introduction
The Manual for the tablesaw is here. The table saw requires induction before you use it for the first time.
Current Status
| Date | Status | Comment |
|---|---|---|
| 2nd February 2019 | Functional |
Planned Upgrades
Parts and upgrades that are planned/Budgeted/Purchased for in the near future
Record Power TS250-C Table Saw
Inductions
The following people are able to provide inductions on the Record table saw
| Name/Contact | Notes |
|---|---|
| Steve-R | |
| Mark-M |
Maintainers
These are the people who look after and repair the Record table saw, they're the ones to contact if there's any problems with it
| Name | Notes |
|---|---|
| Steve-R |
Recent Changes
If you make any non-trivial changes to the Record table saw or perform maintenance please note it here, delete records older than 1 yr
- Replace split section of extractor hose, replace paper filter element in dust extractor Stever (talk) 14:04, 15 July 2021 (BST)
- Clean and wax table Stever (talk) 18:58, 28 May 2021 (BST)
- Changed blade, Adjusted sliding table for chopping, Adjusted and straightened up side block for slicing, Dismantled and cleaned out blocked dust extractors, Adjusted and cut underlaying plastic blade/dust guard to fit, Changed plug fuse in combined power supply. Vidar Velle March 8th 2020
- Fitted double socket to allow proper use of dust extract Jmf (talk) 08:01, 7 July 2019 (UTC)
- Readjusted the sliding table. Vidar Valle 15th Feb 2018