Tools/minimill
Chester Cobra Mini Mill
This page has been noted as requiring attention to bring it up to the basic standard as per the guidance
Please remove this tag once this page has been improved that standard
Introduction
This is a re-branded SIEG X1 micro mill which has a chuck capacity of 10mm with the standard drill-type chuck or takes an unknown taper fitting for a proper milling chuck. It has electronic speed control and 2 gears, dual-speed z-axis controls and a 45 degree tilting column. Induction is not required for using this tool but suitable PPE including safety googles MUST be worn, if you'd like help using it then please contact one of the "Knowledgeable users" listed below for assistance. We do not keep any stock of milling cutters suitable for this machine and you'll have to provide your own, this is because cutters are expensive and easily broken and it wouldn't be fair to others to have to pay for them. The manual for the mini-mill is here and the maintenance manual is here.
Current Status
Date | Status | Comment |
---|---|---|
10th September 2018 | Functional |
Planned Upgrades
Parts and upgrades that are planned/Budgeted/Purchased for in the near future
Chester Cobra Mini Mill Caretakers
Knowledgeable Users
The following people are able to provide assistance with the mini mill. If you consider yourself experienced at using small mills and are willing to help others then please add yourself to this list
Name/Contact | Notes |
---|---|
Steve-R | In Reading about 50% of the time |
James-M | |
Ian-P |
Maintainers
These are the people who look after and repair the Chester mini mill, they're the ones to contact if there's any problems with it
Name | Notes |
---|---|
Steve-R | |
James-M |
Recent Changes
If you make any non-trivial changes to the Chester mini mill or perform maintenance please note it here, delete records older than 1 yr