Tools/labelmaker

From rLab Wiki

Brother PT-E550WSP Label Printer

Introduction

Brother PT-E550WSP Label Printer

A thermal label printer, capable of printing onto a range of tapes in sizes from 3.5mm up to 24mm wide, and heatshrink tubing for labelling cables. There are limited supplies of label tape available in a box on the electronics shelves but if you need something specific or plan on using a lot of tape you will need to bring your own. Please only charge it using the supplied charger, it uses a non-standard type of charger (12V center-negative) and will be damaged if a standard charger is used!

The machine uses the Brother TZe format cartridges. A list of available tapes can be found on Brother's website.

The user manual for the PT-E550WSP can be found here. There is also a manual for using the label printer via it's wifi network interface here and the correct software is installed on Design Station 2.

Current Status

Date Status Comment
24th September 2020 Functional

Planned Upgrades

Parts and upgrades that are planned/Budgeted/Purchased for the Brother label printer in the near future


Tool Caretakers

Maintainers

These are the people who look after and repair the Brother label printer, they're the ones to contact if there are any problems with it

Name Notes

Recent Changes

If you make any non-trivial changes to the Brother label printer or perform maintenance please note it here, delete records older than 1 yr