Project/KitchenClock

Revision as of 18:48, 3 October 2018 by imported>Jmf

We're making a new kitchen clock that should showcase a wide variety of manufacturing techniques that we have available at rLab.

File:Kitchclock.jpg
The new clock mounted on the wall

The idea is that each numeral on the clock will be made by a different person using a different method. If you're up for making one of the numerals then please have a go!

  • Numerals can be Arabic, Roman, or English words
  • Any font or style is OK
  • Numerals should be very roughly 75mm high and ideally should stand no more than 25mm proud of the wall.
  • Numerals should be placed about 300mm from the edge of the clock bezel and fixed to the wall using removable sticky pads
  • Numerals should be made at rLab, using equipment we have
  • If your part requires power to operate it must be solar or long-life battery, no wires to external power sources
  • Once all numerals are complete, if there's still interest then some can be replaced with new ones
  • Hands and clock body can be replaced too, but only once all numerals are done
  • Update this page to reflect any changes you make






Current status
Part Made By Using Technique Date Installed Picture Details
Clock Body Steve 3D Printing 1st October 2018 Printed from red PLA on the 3D Printer
Hands Steve Laser Cutting 1st October 2018 Laser cut from polystyrene
'1' Numeral Volunteers welcome! Undecided
'2' Numeral James M Vinyl Cutter 3rd October 2018
Vinyl cut holographic film, mounted on laser cut acrylic
'3' Numeral Steve 3D Printing 2nd October 2018
3D printed in a variety of colours and effect including metalic and glow-in-the-dark
'4' Numeral Volunteers welcome! Undecided
'5' Numeral Volunteers welcome! Undecided
'6' Numeral Volunteers welcome! Undecided
'7' Numeral Volunteers welcome! Undecided
'8' Numeral Volunteers welcome! Undecided
'9' Numeral Volunteers welcome! Undecided
'10' Numeral Volunteers welcome! Undecided
'11' Numeral Volunteers welcome! Undecided
'12' Numeral Volunteers welcome! Undecided
Previous Parts
Part Made By Using Technique Date Installed Date Removed Picture Details
Example Example Example Example Example Example Example