rLab

User:Stever/boxford/speedsnfeeds

< User:Stever
Revision as of 13:58, 25 August 2021 by imported>Stever

All recipes from personal experience and tested, ones in italics are known working but may not be the maximum loading possible

H-13 Tool Steel

6mm 4-flute flat end mill, solid carbide, TiAlN coated

Roughing : 35m/min, 7mm depth of cut, 0.04mm feed per tooth, 0.5mm width of cut Width is at maximum, depth might be deeper

6mm 2 flute ball nose end mill, Solid Carbide, Uncoated

Retrieved from "https://wiki.rlab.org.uk/wiki/User:Stever/boxford/speedsnfeeds?oldid=4554"