User:Stever/boxford/speedsnfeeds: Difference between revisions
Content added Content deleted
imported>Stever (Created page with "== H-13 Tool Steel == ===6mm 4-flute flat end mill, solid carbide, TiAlN coated=== 35m/min, 7mm depth of cut, 0.04mm feed per tooth, 0.5mm width of cut ===6mm 2 flute ball nos...") |
imported>Stever No edit summary |
||
| Line 1: | Line 1: | ||
All recipes from personal experience and tested, ones in italics are known working but may not be the maximum loading possible |
|||
== H-13 Tool Steel == |
== H-13 Tool Steel == |
||
===6mm 4-flute flat end mill, solid carbide, TiAlN coated=== |
===6mm 4-flute flat end mill, solid carbide, TiAlN coated=== |
||
35m/min, 7mm depth of cut, 0.04mm feed per tooth, 0.5mm width of cut |
Roughing : ''35m/min, 7mm depth of cut, 0.04mm feed per tooth, 0.5mm width of cut'' Width is at maximum, depth might be deeper |
||
===6mm 2 flute ball nose end mill, Solid Carbide, Uncoated=== |
===6mm 2 flute ball nose end mill, Solid Carbide, Uncoated=== |
||
Revision as of 13:58, 25 August 2021
All recipes from personal experience and tested, ones in italics are known working but may not be the maximum loading possible
H-13 Tool Steel
6mm 4-flute flat end mill, solid carbide, TiAlN coated
Roughing : 35m/min, 7mm depth of cut, 0.04mm feed per tooth, 0.5mm width of cut Width is at maximum, depth might be deeper