Anonymous user
Tools/ultimaker/maintenance: Difference between revisions
→Nozzles
imported>Jmf (→Scope) |
imported>Jmf |
||
Line 15:
The Olsson ruby nozzles must be fitted to the correct torque - 0.5Nm. Overtightening can crack the ruby and destroy the nozzle.
Nozzles must be removed and fitted hot. Heat to ~200 degrees and be careful.
Full instructions can be found [https://support.3dverkstan.se/article/66-the-olsson-ruby-instructions-for-use here.]
== Belts and Sliders ==
|