Anonymous user
Tools/ultimaker/maintenance: Difference between revisions
→Electronics
imported>Jmf (Created page with "<big><big>'''Ultimaker 2+ 3D Printers - Maintenance Information'''</big></big> == Scope == This page contains information about maintaining the rLab Ultimaker 2+ printers. It...") |
imported>Jmf |
||
Line 22:
== Electronics ==
The two electronics modules are located
Each plate is secure by two bolts
Check the cables are properly inserted in each board - the front screen will glitch if it is not correctly plugged in.
There are three microswitches for X, Y and Z -axis limits switches. We have had one bad connection to a limit switch requiring re-soldering. Check these if the head will not home correctly.
| |||