Anonymous user
Tools/ultimaker/maintenance: Difference between revisions
m
→Electronics
imported>Jmf |
imported>Jmf m (→Electronics) |
||
(One intermediate revision by the same user not shown) | |||
Line 2:
== Scope ==
This page contains information about maintaining the rLab Ultimaker 2+ printers. It is for reference only to assist
While not an exact match, the [[media:Um2_assembly.pdf|Ultimaker 2 Assembly Manual]] is a good reference guide to most elements of the 2+ printers as well.
Line 26:
== Electronics ==
The two electronics modules are located underneath the printer behind metal cover plates.
Each plate is
Check the cables are properly inserted in each board - the front screen will glitch if it is not correctly plugged in.
There are three microswitches for X, Y and Z -axis
|