Tools/routertable/induction: Difference between revisions
imported>Stever No edit summary |
imported>Stever (Typos and cleanup) |
||
Line 49: | Line 49: | ||
*There are 3 places that the electrical supply to the router can be switched from |
*There are 3 places that the electrical supply to the router can be switched from |
||
#The wall socket - This is your main safety method, unplug when adjusting! |
#The wall socket - This is your main safety method, unplug when adjusting! |
||
#The push switch on the front of the |
#The push switch on the front of the table - This is the main way to control the router in normal use |
||
#The red switch on the router it's self - This is only for changing bits |
#The red switch on the router it's self - This is only for changing bits |
||
*Handle router bits with care, they can be extremely sharp |
*Handle router bits with care, they can be extremely sharp |
||
Line 65: | Line 65: | ||
| Setting Up the machine || |
| Setting Up the machine || |
||
'''Types of cutting bit'''[[File:LabeledRouterBack.jpg|thumb|200px|]] |
'''Types of cutting bit'''[[File:LabeledRouterBack.jpg|thumb|200px|]] |
||
* Edge Cutters - are for creating decorative profiles or join rebates, they often have ball bearings at the end so there |
* Edge Cutters - are for creating decorative profiles or join rebates, they often have ball bearings at the end so there may not be a need for a fence guide. |
||
* Groove Cutters - create channels starting at edges and don't generally use guide bearings so the fence will needed |
* Groove Cutters - create channels starting at edges and don't generally use guide bearings so the fence will needed |
||
* for images and explanation of each bit a good website https://www.rockler.com/router-bit-basics-common-types-router-bit |
* for images and explanation of each bit a good website https://www.rockler.com/router-bit-basics-common-types-router-bit |
||
Line 71: | Line 71: | ||
'''Fitting a collet and router bit''' |
'''Fitting a collet and router bit''' |
||
#Ensure the power switch is OFF and the router disconnected from mains |
#Ensure the power switch is OFF and the router disconnected from mains |
||
#Ensure the retracting shutter is fully closed (3), it will cause the router to jam |
#Ensure the retracting shutter is fully closed (3), it will cause the router to jam during this procedure if it isn't and it quite difficult to release once jammed. The cover can only be closed when the switch is in the off position. |
||
#Check the depth stop lock knob (11) is fully retracted and release the Plunge Lock Lever (7) |
#Check the depth stop lock knob (11) is fully retracted and release the Plunge Lock Lever (7) |
||
#Plunge the router to its maximum depth (raise the spindle all the way) using the micro winder (8) and engage the plunge lock lever (7) [[File:LabeledRouterFront.jpg|thumb|200px|]] |
#Plunge the router to its maximum depth (raise the spindle all the way) using the micro winder (8) and engage the plunge lock lever (7) [[File:LabeledRouterFront.jpg|thumb|200px|]] |
||
Line 109: | Line 109: | ||
** Set it to the correct distance, remember it doesn't have to be parallel to the table, only at the correct perpendicular distance |
** Set it to the correct distance, remember it doesn't have to be parallel to the table, only at the correct perpendicular distance |
||
** Lock it in place |
** Lock it in place |
||
** Consider if you want to use the combs to hold work against the fence for your cut, they can be especially helpful for small or thin work, or if you're expecting to have to perform the same operation on a lot of work pieces. If you do decide they' |
** Consider if you want to use the combs to hold work against the fence for your cut, they can be especially helpful for small or thin work, or if you're expecting to have to perform the same operation on a lot of work pieces. If you do decide they'll be useful then then now is the time to fit them. |
||
* If you're using a template to guide the cut |
* If you're using a template to guide the cut |
||
** Ensure the template is securely fixed to the work |
** Ensure the template is securely fixed to the work |
||
Line 115: | Line 115: | ||
** Plan out how you're going to move the work against the cutter to ensure it's always moving in the proper direction. |
** Plan out how you're going to move the work against the cutter to ensure it's always moving in the proper direction. |
||
* Check the area around you. You're going to have to move the work into and out of the cutting zone, plan how you're going to do this. Make sure the areas to both sides of the router table and clear and nothing is going to get in the way of your work. |
* Check the area around you. You're going to have to move the work into and out of the cutting zone, plan how you're going to do this. Make sure the areas to both sides of the router table and clear and nothing is going to get in the way of your work. |
||
* Plan how you're going to handle your work piece. Think about how you'll position your self and what moves you're going to have to make. If the work |
* Plan how you're going to handle your work piece. Think about how you'll position your self and what moves you're going to have to make. If the work is large consider if asking another person to help you handle it will make things safer. |
||
|| How to get the results you want |
|| How to get the results you want |
||
|- |
|- |
||
Line 139: | Line 139: | ||
#Remove all material from the table area and router |
#Remove all material from the table area and router |
||
#Check the extractor to make sure it's not full and empty it if it is |
#Check the extractor to make sure it's not full and empty it if it is |
||
#Examine the router bit and check if it's still sharp, if it's blunt then buy a new one and submit the receipt |
#Examine the router bit and check if it's still sharp, if it's blunt then buy a new one and submit the receipt or let the maintainers know so it can be re-sharpened |
||
#Use a portable vacuum to clean the router table and the area around the cutting bit |
|||
#Sweep up the area around the router table. The dust exact should have caught most of it but some always escapes |
|||
|| Leave the saw cleaner than you found it, cleanliness is a safety issue when working around others. |
|| Leave the saw cleaner than you found it, cleanliness is a safety issue when working around others. |
||
|- |
|- |
Revision as of 11:59, 4 November 2019
Triton Compact Precision Plunge Router 1010W / 1-1⁄2hp Induction
Some of the tools at the Hackspace are potentially hazardous to use, for these tools members are required to have an induction before they can use them. Inductions provide the most basic information on how to safely and effectively use the simpler functions of the tools, we appreciate that some members may have professional experience on some of these tools and in this case please tell your induction provider and the induction may be very reduced and just cover any risks or procedures specific to rLab. Some tools have multiple levels of induction in order to cover more advanced uses of that tool without making the basic induction take too long, higher induction levels will introduce some of the more advanced features of the tools but as with all inductions are only intended to provide basic information on the capabilities of the tools and how to use them safely. Some members of rLab may be willing to offer more detailed tuition beyond basic induction level or offer guided practice sessions in exchange for beer money or assistance on their own projects.
For all tools you are only required to take level-1 induction before use, after that you may perform any task that you feel confident you can do safely, higher levels of induction may be useful to you in performing more advanced operations but are not required before doing tasks covered in them so long as you're confident of your ability to handle those tasks without risk to yourself, others, or the tool.
PLEASE NOTE : All induction providers are volunteers who are providing inductions to the best of their ability but are NOT qualified instructors. Inductions are provided on a best-effort basis but you and you alone are responsible for your safety while using the tools and for satisfying yourself that you can operate the tools safely. There are professional training courses available from various providers in Reading and the surrounding area if you feel they are appropriate for the level of work you intend to undertake. Reading these notes is NOT a substitute for an in-person induction.
Note for wiki editors : Please do not edit induction pages unless you are one of of the people that gives that induction
Topic | Detailed contents | Rationale | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capabilities |
|
What's this tool intended to do so people know when to choose this tool and when to pick something else. | ||||||||||||||||||
Machine overview |
|
Basics of how the router works | ||||||||||||||||||
PPE |
|
Clothing and equipment to avoid injury | ||||||||||||||||||
Materials |
|
What stuff can be used on this machine | ||||||||||||||||||
General Safety |
|
General safety precautions to avoid the more obvious hazards | ||||||||||||||||||
Setting Up the machine |
Types of cutting bit
Fitting a collet and router bit
|
|||||||||||||||||||
Setting up for your cut |
|
How to get the results you want | ||||||||||||||||||
Making your cut |
|
Executing a cut safely and getting a good finish | ||||||||||||||||||
Cleaning Up Afterwards |
|
Leave the saw cleaner than you found it, cleanliness is a safety issue when working around others. | ||||||||||||||||||
Manual Link |
https://www.whiteint.com.au/documents/Manuals%5C801219_500.pdf |
|||||||||||||||||||
Trouble Shooting |
If the retracting Switch cover (3) will not close:
If you're getting a rough surface finish
|