Tools/projector
Projector & Screen
Introduction
A Mitsubishi HC1100 DLP video projector and screen,mounted in the ceiling of the main room, upstairs in the lab. The projector has VGA and HDMI inputs, with cables routed to the pillar next to Design Station 2.
A manual for the projector can be found here
There is no remote control for the projector... There are step ladders in the cupboard though.
To preserve the life of the projector bulb, always ensure it is switched off again after use.
A powered screen is mounted above the whiteboard. Please resist the temptation to write on the screen instead of the whiteboard... The screen is controlled with the attached hand-held controller to raise and lower it.
Current Status
| Date | Status | Comment |
|---|---|---|
| 4th October 2018 | Functional | Working properly |
Planned Upgrades
Parts and upgrades that are planned/Budgeted/Purchased for in the near future
- None planned
Projector Caretakers
Maintainers
These are the people who look after and repair the projector, they're the ones to contact if there's any problems with it
| Name | Notes |
|---|---|
Recent Changes
If you make any non-trivial changes to the projector or perform maintenance please note it here, delete records older than 1 yr