Tools/inspectionmicroscope

From rLab

Tool Inspection Microscope

Introduction[edit]

Tool inspection microscope

This is a 7 - 45x inspection microscope, with CCD camera that displays on a 10" screen.

The microscope is kept next to the lathe, since lathe tools are it's most common use

The microscope has focus and zoom controls.

It is fitted with a ring LED light which has its own power supply, switch and brightness control knob.

To use the camera, turn on at the switch next to it, adjust focus with the slide wheel on the back of the microscope and brightness with the knob on it's power supply on the wall. Be sure to turn off after use.

Current Status[edit]

Date Status Comment
19th October 2020 Functional

Planned Upgrades[edit]

Parts and upgrades that are planned/Budgeted/Purchased for in the near future

  • None Planned

Tool Inspection Microscope Caretakers[edit]

Maintainers[edit]

These are the people who look after and repair the tool inspection microscope, they're the ones to contact if there's any problems with it

Name Notes

Recent Changes[edit]

If you make any non-trivial changes to the tool inspection microscope or perform maintenance please note it here, delete records older than 1 yr

  • Installed! Stever (talk) 17:36, 19 October 2020 (BST)