Tools/forge/induction

Some of the tools at the Hackspace are potentially hazardous to use, for these tools members are required to have an induction before they can use them. Inductions provide the most basic information on how to safely and effectively use the simpler functions of the tools, we appreciate that some members may have professional experience on some of these tools and in this case please tell your induction provider and the induction may be very reduced and just cover any risks or procedures specific to rLab. Some tools have multiple levels of induction in order to cover more advanced uses of that tool without making the basic induction take too long, higher induction levels will introduce some of the more advanced features of the tools but as with all inductions are only intended to provide basic information on the capabilities of the tools and how to use them safely. Some members of rLab may be willing to offer more detailed tuition beyond basic induction level or offer guided practice sessions in exchange for beer money or assistance on their own projects.

For all tools you are only required to take level-1 induction before use, after that you may perform any task that you feel confident you can do safely, higher levels of induction may be useful to you in performing more advanced operations but are not required before doing tasks covered in them so long as you're confident of your ability to handle those tasks without risk to yourself, others, or the tool.

PLEASE NOTE : All induction providers are volunteers who are providing inductions to the best of their ability but are NOT qualified instructors. Inductions are provided on a best-effort basis but you and you alone are responsible for your safety while using the tools and for satisfying yourself that you can operate the tools safely. There are professional training courses available from various providers in Reading and the surrounding area if you feel they are appropriate for the level of work you intend to undertake. Reading these notes is NOT a substitute for an in-person induction.

Note for wiki editors : Please do not edit induction pages unless you are one of of the people that gives that induction

The forge gets up to a maximum of 1350 ºC, uses flammable gas, has the risk of igniting metals and many other hazards, for that reason an induction is compulsory before using the forge. Induction normally takes about 2 hours, and another 2 hours for the forge to cool down afterwards before it can be put safely away. The forge has a useage charge of £3/hr so you can expect to pay in the region of £10 to cover 2 hours of forge time and materials to use for practice.

Topic	Detailed Contents	Rationale
Suitable Clothing	Old Clothes, they're going to get burn spots Overalls are best Avoid synthetic fabrics, they burn and melt Heavy, Steel Toecap boots are a very good idea, but at least stout shoes, no sandals, no open-toed shoes	Suitable clothing is essential for safety
PPE Required	Goggles are required AT ALL TIMES WHILE FORGE IS LIT - the forge WILL shoot out flakes of red-hot scale Welding gloves or heat-tolerant work gloves - dop rods will get hot! Anti-vibration gloves if you're doing a lot of forging Ear protection while hammering	Good PPE to protect from specific hazards
Workshop hazards and mitigation	Good air circulation needed - doors open but only slightly, monoxide hazard and detectors - immediate shut-down and evacuate if they go off Heat buildup in the laser room Slip hazard from quenching oil Hazards of metals high in nickel, chrome, cadmium etc, and protection needed Arc-eye hazards of welding	Hazards other than fire that could impact the rest of the workshop
Fire risks	Fire and burns are the single largest hazard in forging. Clearing the area around the forge of all flammable materials, especially sawdust and the bins Be aware of hazards of flammable vapours and solvents, keep well away from the forge Back of the forge gets hot too, so be aware of what you're backed up against	Things that can cause fire
Dealing with Fire	In case of fire, TURN GAS OFF! What types of extinguisher to use on what sort of fire Using fire extinguishers Calling for help, alerting people Consider if the fire is small enough to fight What types are suitable for what fires We cannot extinguish metal fires, use the vermiculite to smother or place on a safe surface NEVER use an extinguisher on the forge it's self, it has nothing flammable anyway and risks an explosion Fire hazard from quench oil How to use an extinguisher	Have to be ready to deal with a fire if it happens
Burn treatment	Evaluating the seriousness of burns Basic burn first-aid	Shouldn't happen, but it's always a risk and people need to know how to deal with that

How steels behave and heat treatments

Use the diagram to explain things

The states the steel can be in, what is critical temperature and why it matters.

               Form above critical

 Plannish under critical

       Using a magnet to test for critical, but learn to use colour

How different types have different hot-hardnesses

Stainless needs a lot more heat

Damascus needs even more

Cover annealing, hardening, normalizing

       Effects of under-heating and over-heating – Stress cracks, decarburization, crumbling

       Effects of oxidizing and reducing flames – Scale, Temperature, Decarburization

Welding onto the dop rods

 Emphasise use a LOT of weld material

Need to normalize the welds

They are GOING to break, what to do when they do

 Watch for starting of cracks

 DO NOT TRY TO CATCH THE HOT METAL

 Pick it up IMMEDIATELY with grips, place onto hot-safe surface

Lighting the forge

Describe the forge and it's parts

       How the tunnel can be opened longer for bigger objects

Never use brick choke and rear door at the same time

Check it over for damage

Vacuum out tunnel – clean before use, not after

Plug it in!

Checking the gas & air valve positions are closed

Start the blower

Let a little air into the forge

Cover the dramatic differences in gas and air settings

Turning on gas at the bottle and burners

Opening the main gas valve and using the lighter to get it lit

Adjusting the gas and air valves to get a flame the right size and slightly reducing

Demonstrate high/low, oxidizing/reducing, show what they look like

       Large flames are more stable, small flames may result in burner over-heat, check this often

       Demonstrate high/low flames

Starting up the second burner if you have a need to for a long object

Normalizing

Why we need to normalize

What it does

Proper procedure

What happens if we're not hot enough, or too hot!

Flattening out the rod

Heating to a suitable colour, testing with magnet if you need to

 Just getting the feel of beating on the metal, try both hammers, see what it's like

Don't touch metal to anvil till you're ready to strike

Correct any error immediately, don't let them grow

Consider the shape we're working towards

The need to come to both dimensions at once and not over-work in one direction

We can't fix over-thinning

REMEMBER TO CORRECT ERRORS AT ONCE

Looking at the metal as it cools, seeing what needs to change

Drawing out using small hammers, large hammer on step, large hammer on side, edge of large hammer

Cycling draw out and flatten

Keep thinning, flattening, drawing out till target shape

Try to get the surface nice, so we can do less grinding

Normalizing

Repeat the normalization cycle

Furnace cooling as an option for normalization but not annealing

Shut down the forge

Air off – Gas off – Air on

Leaving the air running to cool the forge if needed

The forge may stay hot enough to start fires for up to 2 hours

Marking out the area of "hot things" when leaving

Normalize and Anneal

This is the last chance to smooth out any gross surface defects or geometry errors

Using a little less heat than before as we're not trying to cause bulk movements

Planishing using the smaller hammers to smooth things as best we can

Normalize for at least 2 cycles and maybe more

Fix geometry before cycles

Using the vermiculite to slow down cooling to achieve maximum softening or furnace cool

Shutting down the forge

As before for shut-down

Letting the forge cool down enough before putting it away

Hand-in-tunnel test

Don’t try to clean inside the tunnel, put it away dirty

Watching out for condensation dripping off the gas bottle

Getting the blades out of the vermiculite and cleaning up.