rLab

Tools/HPDesignJet130

Revision as of 17:22, 9 February 2019 by imported>Ruperte (Created page with "==DRAFT== The printer is located in the small machine room, opposite the laser cutter. We have a small stock of paper, in A1, A2, and A3 size, located in the yellow shelf's...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

DRAFT

The printer is located in the small machine room, opposite the laser cutter.

We have a small stock of paper, in A1, A2, and A3 size, located in the yellow shelf's underneath, usually 3rd one down.

To use the printer, you need a laptop with a USB port.

The drivers for it can be downloaded from here - https://support.hp.com/gb-en/drivers/selfservice/hp-designjet-130-printer-series/352387

Drivers are available for Windows 10, Windows 7/XP and Linux.

Using

The display:

If the green led is on at the bottom left - this means the printer has power, but confusingly does not mean it is on.

There are 3 buttons

Cancel Job (Top Left)

Page Eject (Top Right)

Power On (Middle Bottom)

You can tell if the printer is actually powered on, if the background light in on, on the display.

Retrieved from "https://wiki.rlab.org.uk/wiki/Tools/HPDesignJet130?oldid=3446"