Anonymous user
Tools/laser: Difference between revisions
→Laser Troubleshooting
imported>Stever |
imported>Stever |
||
Line 91:
Set the head height so that it's just touching the focus block while in that position and tighten up the knurled ring again, you'll now have the head in the proper focus position and can cut using normal procedure.
|-
| "Not Enough Extend Space" error on the laser panel || You have the workpiece too close to one of the limits of the laser and the head does not have enough space to move around and complete the job. This usually happens with etching because the machine needs a short "run-up" on either side of the etched area to get to proper speed before the etching begins. || Move your workpiece a few millimeters away from the edge of the machine and re-run the job.
|-
| "Frame Slop" error displayed ||
| |||