Jump to content

Tools/laser: Difference between revisions

Tools/laser (edit)

Revision as of 13:13, 7 December 2019

664 bytes removed ,  4 years ago
→‎Laser Troubleshooting: RDWorks is deprecated, no longer recommended for use
imported>Stever
(→‎Laser Troubleshooting: block isn't always 6mm now)
imported>Stever
(→‎Laser Troubleshooting: RDWorks is deprecated, no longer recommended for use)
Line 50:
|-
! Symptom !! Cause !! Fix
|-
| RDWorks is coming up in hieroglyphics || Usually means it has managed to crash, and had defaulted back to it's out of the box setup - which is Chinese! || To reset it, go to the Help Menu - then to the Language and pick English.
|-
|rowspan="2"| RDWorks isn't talking to the laser || RDWorks has crashed and defaulted back to it's out of the box setup || At the bottom right, press the what looks like a button, where it says "USB: Auto" then change it to "web", and an IP address of 172.16.0.100
|-
| RDWorks version 8 or later has been installed || The laser will not work with any version of RDWorks after version 7, make sure you're running the right one
|-
| Bed won't rise high enough || The head has been knocked and moved upwards, preventing it from focusing properly on thin sheets || To fix it home the laser both in the XY and the Z modes, place the focus block under the head while at the home position, and then turn the knurled ring on the red tube to release the head, make sure to be holding it so it doesn't drop out!
Anonymous user
Retrieved from "https://wiki.rlab.org.uk/wiki/Special:MobileDiff/2689"
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
More information