Revision as of 17:04, 24 September 2021 (edit) imported>Stever (→‎Remote controls & Honesty Box) ← Older edit		Revision as of 17:06, 24 September 2021 (edit) (undo) imported>Stever (→‎Laser cutter) Newer edit →
Line 348: * The operator should never leave it unattended when it's running. * We have had few fires in the laser cutter now. Fortunately we have the skills required to repair it, but you will not make yourself popular with other members if you do set it alight. * If there is a fire * Our first preference is for you to use the Fire Blanket before the Fire Extinguisher to put out the flames Try just turning it off with the E-stop If that doesn't work, and you can do so safely, pull the burning material out and use the fire blanket If that doesn't work or you can't do it safely, use the CO2 fire extinguisher As a last resort, if all else has failed, use the powder extinguisher, it will probably write-off the laser but that's better than burning the hackspace down! * The perspex lid absorbs any scattered laser light but please be aware that there is a gap at the front - please resist the temptation, and prevent others, from peering through the gap

Hackspaceinduction (edit)