Anonymous user
Tools/metallathe: Difference between revisions
→Accessories
imported>Jmf m (→Accessories) |
imported>Stever |
||
Line 53:
| [[File:M300catchplate.jpg]] || Catch plate || Work Holding || For turning between centres, maximum speed will depend on workpiece but is usually severely limited. || Shelf under lathe
|-
| [[File:Lathe dogs.jpg]] || Lathe Dogs || Work Holding || Used with the Catch plate to drive the work. Three sizes - 1/2", 3/4" and 1". || In Black metal cabinet near tailstock, top drawer
|-
| [[File:M300travelingsteady.jpg]] || Travelling Steady || Work holding || Stabilizes objects which are thin and long and which have to be parallel-turned. The bolts to attach it to the saddle are duct-taped to it. || Shelf under lathe
Line 61:
| [[File:M300millingslide.jpg]] || Milling slide || Work holding || Used when milling small items with a milling cutter mounted in the lathe chuck. Requires mounting holes drilling into cross slide in order to be mounted so not currently usable || Red cupboard by fire door
|-
| [[File:M300keychuck.jpg]] || 16mm Keyed Drill Chuck on 3MT spindle || Tool holding || Used in the tailstock to hold drills for boring out workpeice || In Black metal cabinet near tailstock, top drawer
|-
| [[File:M300keylesschuck.jpg]] || 13mm Keyless drill chuck on 3MT spindle || Tool holding || Used in the tailstock to hold drills for boring out workpeice || In Black metal cabinet near tailstock, top drawer
|-
| [[File:2mt chuck.jpg]] || 10mm Keyed Drill Chuck on 2MT spindle || Tool holding || Used in the tailstock to hold smaller drills for boring out workpiece || In Black metal cabinet near tailstock, top drawer
|-
| [[File:M300livecentre.jpg]] || Live centre on 3MT spindle || Work holding || Holds the far end of a workpiece steady || In Black metal cabinet near tailstock, top drawer
|-
| [[File:2mt live centre.jpg]] || Live centre on 2MT spindle || Work holding || Similar to the 3MT live centre, but for smaller workpieces || In
|-
| [[File:2mt dead centre.jpg]] || Dead centre on 2MT spindle || Work holding || Holds the end of a long workpiece without rotating. Useful for guiding taps and smaller workpieces || In
|-
| [[File:2mt half dead centre.jpg]] || Half dead centre on 2MT spindle || Work holding || Small dead centre with part of the side ground away to allow a tool to get close to the end of the workpiece || In
|-
| [[File:2mt reducer.jpg]] || 3MT to 2MT Sleeve || Work holding || Used to fit 2MT tools into our 3MT tailstock. We have a number of these available. || In
|-
| [[File:M300deadcentre.jpg]] || Dead Centre on 5MT Sleeve || Work holding || Used in head for turning between centers in conjunction with catch plate and dogs || In Black metal cabinet near tailstock, top drawer
|-
| [[File:M300tapguide.jpg]] || Spring loaded tapping guide || Tool holding || Assists in accurate starting of taps into concentric holes || In Black metal cabinet near tailstock, top drawer
|-
| [[File:M300dialind.jpg]] || Dial indicator on magnetic Base || General || For accurately centring work and for general maintenance tasks ||
|-
| [[File:M300LEDLamp.jpg]] || LED lamp on magnetic base || General || Lighting up work! || On lathe
| |||