Project/KitchenClock: Difference between revisions
Content added Content deleted
imported>Stever m (layout improvement) |
imported>Stever (link image) |
||
Line 37: | Line 37: | ||
|| Vinyl cut holographic film, mounted on laser cut acrylic |
|| Vinyl cut holographic film, mounted on laser cut acrylic |
||
|- |
|- |
||
| '3' Numeral || [[User:Stever|Steve]] || [[Tools/ultimaker|3D Printing]] || 2nd October 2018 || ||3D printed in a variety of colours and effect including metalic and glow-in-the-dark |
| '3' Numeral || [[User:Stever|Steve]] || [[Tools/ultimaker|3D Printing]] || 2nd October 2018 || [[File:Clock 3.jpg|center|100px|]] ||3D printed in a variety of colours and effect including metalic and glow-in-the-dark |
||
|- |
|- |
||
| '4' Numeral || Volunteers welcome! || Undecided || || || |
| '4' Numeral || Volunteers welcome! || Undecided || || || |
Revision as of 17:34, 3 October 2018
We're making a new kitchen clock that should showcase a wide variety of manufacturing techniques that we have available at rLab.
The idea is that each numeral on the clock will be made by a different person using a different method. If you're up for making one of the numerals then please have a go!
- Numerals can be Arabic, Roman, or English words
- Any font or style is OK
- Numerals should be very roughly 75mm high and ideally should stand no more than 25mm proud of the wall.
- Numerals should be placed about 300mm from the edge of the clock bezel and fixed to the wall using removable sticky pads
- Numerals should be made at rLab, using equipment we have
- If your part requires power to operate it must be solar or long-life battery, no wires to external power sources
- Once all numerals are complete, if there's still interest then some can be replaced with new ones
- Hands and clock body can be replaced too, but only once all numerals are done
- Update this page to reflect any changes you make
Part | Made By | Using Technique | Date Installed | Picture | Details |
---|---|---|---|---|---|
Clock Body | Steve | 3D Printing | 1st October 2018 | Printed from red PLA on the 3D Printer | |
Hands | Steve | Laser Cutting | 1st October 2018 | Laser cut from polystyrene | |
'1' Numeral | Volunteers welcome! | Undecided | |||
'2' Numeral | James M | vinyl cutter | 3rd October 2018 | Vinyl cut holographic film, mounted on laser cut acrylic | |
'3' Numeral | Steve | 3D Printing | 2nd October 2018 | 3D printed in a variety of colours and effect including metalic and glow-in-the-dark | |
'4' Numeral | Volunteers welcome! | Undecided | |||
'5' Numeral | Volunteers welcome! | Undecided | |||
'6' Numeral | Volunteers welcome! | Undecided | |||
'7' Numeral | Volunteers welcome! | Undecided | |||
'8' Numeral | Volunteers welcome! | Undecided | |||
'9' Numeral | Volunteers welcome! | Undecided | |||
'10' Numeral | Volunteers welcome! | Undecided | |||
'11' Numeral | Volunteers welcome! | Undecided | |||
'12' Numeral | Volunteers welcome! | Undecided |
Part | Made By | Using Technique | Date Installed | Date Removed | Picture | Details |
---|---|---|---|---|---|---|
Example | Example | Example | Example | Example | Example | Example |