Anonymous user
Main Electrical Panel: Difference between revisions
Create image links
imported>Stever (expand) |
imported>Stever (Create image links) |
||
Line 4:
The main incoming feed is bottom left on the panel, which goes through the power company fuses and meter and into the large master isolator switch on the left. This interrupts all power in the entire hackspace when used. The maser isolator feeds the 3-phase distribution board, the single-phase distribution board and the 63A 3-phase special purpose socket. The 3-phase distribution board then goes on to feed special-circuits 3-phase board which powers the [[Tools/metallathe|lathe]] and the 3 x 3-phase power points in the space. DB-3A is a contactor board that was intended to operate the lathe and laser cutter but is currently un-used.
{| class="wikitable"
|-
! Description !! Image
|-
| Incommer || [[File:Incommer.jpg|200px]]
|-
| Master Isolator || [[File:Isolator.jpg|200px]]
|-
| 3 Phase main board || [[File:zone23board.jpg|200px]]
|-
| DB-1A || [[File:DB1A.jpg|200px]]
|-
| DB-2A || [[File:DB2A.jpg|200px]]
|-
| DB-3A || [[File:DB3A.jpg|200px]]
|-
| E-Stop Loop || [[File:Estopsystem.jpg|200px]]
|-
| 3 Phase outlets x 2 || [[File:3phaseoutlets.jpg|200px]]
|}
| |||