Main Electrical Panel: Difference between revisions
imported>Stever (add descriptions what everything does) |
m (1 revision imported) |
||
(7 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
The Main Electrical panel is where power comes into rLab, and we use a lot of power! The wiring is being updated at the moment so this page should NOT be considered authoritative as regards the current wiring setup, please check very carefully what the actual situation is before carrying out |
The Main Electrical panel is where power comes into rLab, and we use a lot of power! The wiring is being updated at the moment so this page was accurate as of 20th June 2021 but should NOT be considered authoritative as regards the current wiring setup, please check very carefully what the actual situation is before carrying out any electrical work. |
||
[[File:mainelectricalpanel.jpg|thumb|400px]] |
[[File:mainelectricalpanel.jpg|thumb|400px]] |
||
The main incoming feed is bottom left on the panel, which goes through the power company fuses and meter and into the large master isolator switch on the left. This interrupts all power in the entire hackspace when used. The maser isolator feeds the 3-phase distribution board, the single-phase distribution board and the 63A 3-phase special purpose socket. The 3-phase distribution board then goes on to feed special-circuits 3-phase board which powers the [[Tools/metallathe|lathe]] and the |
The main incoming feed is bottom left on the panel, which goes through the power company fuses and meter and into the large master isolator switch on the left. This interrupts all power in the entire hackspace when used. The maser isolator feeds the 3-phase distribution board, the single-phase distribution board and the 63A 3-phase special purpose socket. The 3-phase distribution board then goes on to feed special-circuits 3-phase board which powers the [[Tools/metallathe|lathe]] and the 2 x 3-phase power points in the space. DB-3A is a contactor board that operates the pillar drill, pedestal grinder and central 16A sockets via the emergency stop system. |
||
{| class="wikitable" |
{| class="wikitable" |
||
Line 28: | Line 28: | ||
Feeds |
Feeds |
||
* Kitchen area light |
|||
* Loading bay lights |
* Loading bay lights |
||
* Laser room lights |
* Laser room lights |
||
Line 34: | Line 33: | ||
* Fire Alarm |
* Fire Alarm |
||
* E-stop control loop |
* E-stop control loop |
||
* 3-Phase 16A Sockets downstairs |
|||
* DB-3A |
* DB-3A |
||
* Lathe |
* [[Tools/metallathe|Lathe]] |
||
* Downstairs main lights |
* Downstairs main lights |
||
* Upstairs main room sockets |
* Upstairs main room sockets |
||
Line 46: | Line 44: | ||
Feeds |
Feeds |
||
* 16A Single phase socket for Bandsaw |
* 16A Single phase socket for the [[tools/bandsaw|Bandsaw]] |
||
* Downstairs 13A sockets on the east wall |
|||
* Downstairs 13A sockets on pillars |
* Downstairs 13A sockets on pillars |
||
* Downstairs 13A sockets on walls |
* Downstairs 13A sockets on walls |
||
Line 65: | Line 64: | ||
Fed From - 3-Phase main distribution unit |
Fed From - 3-Phase main distribution unit |
||
Feeds |
|||
Feeds - Nothing right now |
|||
* Pillar Drill |
|||
* Pedestal Grinder |
|||
* 16A socket on west pillar |
|||
* 16A socket on east pillar |
|||
|| [[File:DB3A.jpg|200px]] |
|| [[File:DB3A.jpg|200px]] |
||
|- |
|- |
||
Line 71: | Line 74: | ||
Fed From - 3-Phase main distribution unit |
Fed From - 3-Phase main distribution unit |
||
Feeds - Interrupts the power supply to DB-1A |
Feeds - Interrupts the power supply to DB-1A and DB-3A |
||
|| [[File:Estopsystem.jpg|200px]] |
|| [[File:Estopsystem.jpg|200px]] |
||
|- |
|- |
||
| '''3 Phase |
| '''3 Phase outlet''' |
||
Fed From |
Fed From |
||
* 63A Socket - Main Isolator |
* 63A Socket - Main Isolator |
||
* 16A Socket - 3-Phase main distribution board |
|||
|| [[File:3phaseoutlets.jpg|200px]] |
|| [[File:3phaseoutlets.jpg|200px]] |
||
|} |
|} |
||
[[Category:hackspace facilities]] |
Latest revision as of 17:13, 11 November 2023
The Main Electrical panel is where power comes into rLab, and we use a lot of power! The wiring is being updated at the moment so this page was accurate as of 20th June 2021 but should NOT be considered authoritative as regards the current wiring setup, please check very carefully what the actual situation is before carrying out any electrical work.
The main incoming feed is bottom left on the panel, which goes through the power company fuses and meter and into the large master isolator switch on the left. This interrupts all power in the entire hackspace when used. The maser isolator feeds the 3-phase distribution board, the single-phase distribution board and the 63A 3-phase special purpose socket. The 3-phase distribution board then goes on to feed special-circuits 3-phase board which powers the lathe and the 2 x 3-phase power points in the space. DB-3A is a contactor board that operates the pillar drill, pedestal grinder and central 16A sockets via the emergency stop system.
Description | Image |
---|---|
Incommer
Fed from - Supply Company Feeds - Master Isolator |
|
Master Isolator
Fed From - Incommer Feeds
|
|
3 Phase main board
Fed From - Master Isolator Feeds
|
|
DB-1A
Fed From - 3-phase distribution board via E-Stop control system Feeds
|
|
DB-2A
Fed From - Master Isolator Feeds
|
|
DB-3A
Fed From - 3-Phase main distribution unit Feeds
|
|
E-Stop Loop
Fed From - 3-Phase main distribution unit Feeds - Interrupts the power supply to DB-1A and DB-3A |
|
3 Phase outlet
Fed From
|