User:Stever/boxford/speedsnfeeds: Difference between revisions
Content added Content deleted
imported>Stever No edit summary |
imported>Stever |
||
| Line 4: | Line 4: | ||
===Roughing=== |
===Roughing=== |
||
6mm 4-flute flat end mill, solid carbide, TiAlN coated: ''35m/min, 7mm depth of cut, 0.04mm feed per tooth, 0.5mm width of cut'' Width is at maximum, depth might be deeper |
6mm 4-flute flat end mill, solid carbide, TiAlN coated: ''35m/min, 7mm depth of cut, 0.04mm feed per tooth, 0.5mm width of cut'' Width is at maximum, depth might be deeper |
||
6mm 2 flute ball nose end mill, Solid Carbide, Uncoated: |
6mm 2 flute ball nose end mill, Solid Carbide, Uncoated: |
||
Revision as of 13:54, 26 August 2021
All recipes from personal experience and tested, ones in italics are known working but may not be the maximum loading possible
H-13 Tool Steel
Roughing
6mm 4-flute flat end mill, solid carbide, TiAlN coated: 35m/min, 7mm depth of cut, 0.04mm feed per tooth, 0.5mm width of cut Width is at maximum, depth might be deeper
6mm 2 flute ball nose end mill, Solid Carbide, Uncoated:
Drilling
6mm HSS Drill bit : 14m/min, 730rpm, 0.02mm FPT, 15mm/min feed, was in danger of stalling spindle, definitely the maximum size that can be drilled in this material