rLab

Tools/routertable/induction: Difference between revisions

Page Discussion

Tools/routertable/induction (edit)

Revision as of 16:15, 16 October 2019

136 bytes added ,  4 years ago
no edit summary
imported>RobynW
No edit summary
imported>RobynW
No edit summary
Line 43:
#Rotate the spindle to engage the spindle lock
#Remove the green circle and use the spanner to loosen and remove the collet (5)[[File:RouterTop.png|thumb|200px|]]
#Insert the new router bit fully into the collet (5), thenwith usea the spannersmall togap tightenfrom the colletpainted (5)section somake thatsure it's holdsnot thetoo far out bitas firmlythis will make it unstable
[[File:RouterBitPlacement.jpg|thumb]]
, then use the spanner to tighten the collet (5) so that it holds the bit firmly
#Disengage the plunge lock lever (7). This will release the collet lock and the retracting switch cover (3)
#Adjust the height as desired with the micro winder (8) and lock in place with plunge lock lever (7)
Anonymous user
Retrieved from "https://wiki.rlab.org.uk/wiki/Special:MobileDiff/3651"