Anonymous user
Tools/plasma/induction: Difference between revisions
Further moving into proper format
imported>Stever (Further moving into proper format) |
imported>Stever (Further moving into proper format) |
||
Line 65:
Selecting proper pressure and how to cascade the regulators to give smooth regulation. How to choose a suitable current for your job (10A + 5A/mm for steels, more for aluminium or copper)
|| Getting the settings right for a smooth cut
|-
| Cutting ||▼
* Preparing material using angle grinder/wire wheel
** Consider contaminants
** Getting good ground contact
** Using guides, both metal and wood, possibility of laser cut guides
** Clamping work consider what’s underneath and on the underside
|| The main procedure for actually cutting into things.
|-
** Show a good cut, too much current, too little current, too little air
** Piercing through tin sheets
|| So you can recognize issues when they happen
|-
* Piercing thicker sheet at an angle
* Descaling use
* Maximum thicknesses that can be cut
|| Cutting thicker materials at lower speeds
|-
|| Miscellaneous other topics
|}
▲Cutting
▲ Torch perpendicular and slow even movement
▲ OK to brace on the material
▲ How to recognise problems
▲ Demo on thin sheet
▲ Practice on thin sheet
▲ Cutting on thicker materials
▲ Cutting speed/spark angle (15-20 deg)
▲ Flick-finishing
▲ Demo & Practice
▲ Other topics
▲ Piercing into enclosed spaces
[[Category:inductions]]
|