Tools/metallathe: Difference between revisions

From rLab
Content added Content deleted
imported>Stever
Tags: Mobile edit Mobile web edit
 
(42 intermediate revisions by 6 users not shown)
Line 2: Line 2:
{{thistoolneedsinduction}}
{{thistoolneedsinduction}}
== Introduction ==
== Introduction ==
[[File:M300Final.jpg|250px|thumb|Harrison M300 Metalworking Lathe]] The Harrison M300 lathe is an educational/Light-duty industrial lathe well suited for our requirements. It has a maximum part diameter of 330mm and a maximum length of 650mm and is designed to work with all standard engineering metals and well as most plastics but please note it is NOT suitable for use with any types of wood because wood fibres are sticky and abrasive so they tend to cause damage to the slideways. Induction is required for all members wanting to use the lathe. The instruction manual for the lathe is available [[media:M300Manual.pdf|here]].
[[File:M300Final.jpg|250px|thumb|Harrison M300 Metalworking Lathe]] The Harrison M300 lathe is an educational/Light-duty industrial lathe well suited for our requirements. It has a maximum part diameter of 330mm and a maximum length of 650mm and is designed to work with all standard engineering metals and well as most plastics but please note it is NOT suitable for use with any types of wood because wood fibres are sticky and abrasive so they tend to cause damage to the slideways. Induction is required for all members wanting to use the lathe and this is controlled by a card reader mounted next to the main power switch. The lathe has now also been fitted with a [[Tools/metallathe/DRO|Digital Read-Out (DRO)]] to make it easier to use, it's still settling in and isn't fully accurate yet but it's usable. The instruction manual for the lathe is available [[media:M300Manual.pdf|here]]. The instruction manual for the DRO is [[media:Lathe DRO Manual.pdf|here]], please do not change the settings.

__TOC__
__TOC__

== Current Status ==
== Current Status ==
{|class="wikitable" style="margin: auto;"
{|class="wikitable" style="margin: auto;"
Line 9: Line 11:
! Date !! Status !! Comment
! Date !! Status !! Comment
|-
|-
| 25th October 2019 || Fully Functional || Oil seals repaired, oil levels should be checked from now on.
| 23rd March 2022 || Fully Functional || Coolant line replaced
|}
|}


Line 45: Line 47:
| [[File:M3003jaw.jpg]] || 3-Jaw self-centring chuck || Work Holding || Standard chuck for jobs not requiring accurate concentricity || On the Lathe usually, spare jaws in the black cabinet by the tailstock
| [[File:M3003jaw.jpg]] || 3-Jaw self-centring chuck || Work Holding || Standard chuck for jobs not requiring accurate concentricity || On the Lathe usually, spare jaws in the black cabinet by the tailstock
|-
|-
| [[File:M3004jaw.jpg]] || 4-Jaw independent chuck || Work Holding || For holding odd-shaped workpeices or work where accurate concentricity or offsets are needed - MAXIMUM SPEED 1700rpm || Shelf under lathe
| [[File:M3004jaw.jpg]] || 4-Jaw independent chuck || Work Holding || For holding odd-shaped workpieces or work where accurate concentricity or offsets are needed - MAXIMUM SPEED 1700rpm || Shelf under lathe
|-
|-
| [[File:M300colletchuck.jpg]] || Collet chuck || Work Holding || For accurate concentricity on round or hexagon workpeices, suitable for high-speed use and small workpeices. Comes with 12 collets and key || Red cupboard by fire door
| [[File:M300colletchuck.jpg]] || Collet chuck || Work Holding || For accurate concentricity on round or hexagon workpieces, suitable for high-speed use and small workpieces. Comes with 12 collets and key || Shelf under lathe
|-
|-
| [[File:M300faceplate.jpg]] || Faceplate || Work Holding || For very large workpieces, MAXIMUM SPEED 1200rpm and possibly much lower depending on workpiece || Shelf under lathe
| [[File:M300faceplate.jpg]] || Faceplate || Work Holding || For very large workpieces, MAXIMUM SPEED 1200rpm and possibly much lower depending on workpiece || Shelf under lathe
Line 53: Line 55:
| [[File:M300catchplate.jpg]] || Catch plate || Work Holding || For turning between centres, maximum speed will depend on workpiece but is usually severely limited. || Shelf under lathe
| [[File:M300catchplate.jpg]] || Catch plate || Work Holding || For turning between centres, maximum speed will depend on workpiece but is usually severely limited. || Shelf under lathe
|-
|-
| [[File:Lathe dogs.jpg]] || Lathe Dogs || Work Holding || Used with the Catch plate to drive the work. Three sizes - 1/2", 3/4" and 1". ||
| [[File:Lathe dogs.jpg]] || Lathe Dogs || Work Holding || Used with the Catch plate to drive the work. Three sizes - 1/2", 3/4" and 1". || In Black metal cabinet near tailstock, top drawer
|-
|-
| [[File:M300travelingsteady.jpg]] || Travelling Steady || Work holding || Stabilizes objects which are thin and long and which have to be parallel-turned. The bolts to attach it to the saddle are duct-taped to it. || Shelf under lathe
| [[File:M300travelingsteady.jpg]] || Travelling Steady || Work holding || Stabilizes objects which are thin and long and which have to be parallel-turned. The bolts to attach it to the saddle are duct-taped to it. || In Black metal cabinet near tailstock
|-
|-
| [[File:Fixed steady.jpg]] || Fixed Steady || Work holding || Holds long workpieces in a fixed location for turning operations in the middle of the work. || In Black metal cabinet near tailstock
| [[File:Fixed steady.jpg]] || Fixed Steady || Work holding || Holds long workpieces in a fixed location for turning operations in the middle of the work. || In Black metal cabinet near tailstock
Line 61: Line 63:
| [[File:M300millingslide.jpg]] || Milling slide || Work holding || Used when milling small items with a milling cutter mounted in the lathe chuck. Requires mounting holes drilling into cross slide in order to be mounted so not currently usable || Red cupboard by fire door
| [[File:M300millingslide.jpg]] || Milling slide || Work holding || Used when milling small items with a milling cutter mounted in the lathe chuck. Requires mounting holes drilling into cross slide in order to be mounted so not currently usable || Red cupboard by fire door
|-
|-
| [[File:M300keychuck.jpg]] || 16mm Keyed Drill Chuck on 3MT spindle || Tool holding || Used in the tailstock to hold drills for boring out workpeice || In Black metal cabinet near tailstock
| [[File:M300keychuck.jpg]] || 16mm Keyed Drill Chuck on 3MT spindle || Tool holding || Used in the tailstock to hold drills for boring out workpiece || On rack on splashback
|-
|-
| [[File:M300keylesschuck.jpg]] || 13mm Keyless drill chuck on 3MT spindle || Tool holding || Used in the tailstock to hold drills for boring out workpeice || In Black metal cabinet near tailstock
| [[File:M300keylesschuck.jpg]] || 13mm Keyless drill chuck on 3MT spindle || Tool holding || Used in the tailstock to hold drills for boring out workpiece || On rack on splashback
|-
|-
| [[File:2mt chuck.jpg]] || 10mm Keyed Drill Chuck on 2MT spindle || Tool holding || Used in the tailstock to hold smaller drills for boring out workpiece || In Black metal cabinet near tailstock
| [[File:2mt chuck.jpg]] || 10mm Keyed Drill Chuck on 2MT spindle || Tool holding || Used in the tailstock to hold smaller drills for boring out workpiece || In Black metal cabinet near tailstock, top drawer
|-
|-
| [[File:M300livecentre.jpg]] || Live centre on 3MT spindle || Work holding || Holds the far end of a workpiece steady || In Black metal cabinet near tailstock
| [[File:M300livecentre.jpg]] || Live centre on 3MT spindle || Work holding || Holds the far end of a workpiece steady || On rack on splashback
|-
|-
| [[File:2mt live centre.jpg]] || Live centre on 2MT spindle || Work holding || Similar to the 3MT live centre, but for smaller workpieces || In black metal cabinet near tailstock
| [[File:2mt live centre.jpg]] || Live centre on 2MT spindle || Work holding || Similar to the 3MT live centre, but for smaller workpieces || In Black metal cabinet near tailstock, top drawer
|-
|-
| [[File:2mt dead centre.jpg]] || Dead centre on 2MT spindle || Work holding || Holds the end of a long workpiece without rotating. Useful for guiding taps and smaller workpieces || In black metal cabinet near tailstock
| [[File:2mt dead centre.jpg]] || Dead centre on 2MT spindle || Work holding || Holds the end of a long workpiece without rotating. Useful for guiding taps and smaller workpieces || On rack on splashback
|-
|-
| [[File:2mt half dead centre.jpg]] || Half dead centre on 2MT spindle || Work holding || Small dead centre with part of the side ground away to allow a tool to get close the the end of the workpiece || In black metal cabinet near tailstock
| [[File:2mt half dead centre.jpg]] || Half dead centre on 2MT spindle || Work holding || Small dead centre with part of the side ground away to allow a tool to get close to the end of the workpiece || On rack on splashback
|-
|-
| [[File:2mt reducer.jpg]] || 3MT to 2MT Sleeve || Work holding || Used to fit 2MT tools into our 3MT tailstock. We have a number of these available. || In black metal cabinet near tailstock
| [[File:2mt reducer.jpg]] || 3MT to 2MT Sleeve || Work holding || Used to fit 2MT tools into our 3MT tailstock. We have a number of these available. || In Black metal cabinet near tailstock, top drawer
|-
|-
| [[File:M300deadcentre.jpg]] || Dead Centre on 5MT Sleeve || Work holding || Used in head for turning between centers in conjunction with catch plate and dogs || In Black metal cabinet near tailstock
| [[File:M300deadcentre.jpg]] || Dead Centre on 5MT Sleeve || Work holding || Used in head for turning between centers in conjunction with catch plate and dogs || In Black metal cabinet near tailstock, top drawer
|-
|-
| [[File:M300tapguide.jpg]] || Spring loaded tapping guide || Tool holding || Assists in accurate starting of taps into concentric holes || In Black metal cabinet near tailstock
| [[File:M300tapguide.jpg]] || Spring loaded tapping guide || Tool holding || Assists in accurate starting of taps into concentric holes || In Black metal cabinet near tailstock, top drawer
|-
|-
| [[File:M300dialind.jpg]] || Dial indicator on magnetic Base || General || For accurately centring work and for general maintenance tasks || On wall mount above lathe
| [[File:M300dialind.jpg]] || Dial indicator on magnetic Base || General || For accurately centring work and for general maintenance tasks || In Black metal cabinet near tailstock, top drawer
|-
|-
| [[File:M300LEDLamp.jpg]] || LED lamp on magnetic base || General || Lighting up work! || On lathe
| [[File:M300LEDLamp.jpg]] || LED lamp on magnetic base || General || Lighting up work! || On lathe
Line 87: Line 89:
| [[File:M300oilcan.jpg]] || Small red oil can || Consumable || Contains ISO-68 lubricating oil to maintain the lathe, not to be used as cutting fluid || Tool-tray on Lathe
| [[File:M300oilcan.jpg]] || Small red oil can || Consumable || Contains ISO-68 lubricating oil to maintain the lathe, not to be used as cutting fluid || Tool-tray on Lathe
|-
|-
⚫
| [[File:M300dieholder.jpg]] || Floating Die-holder set || Tool Holding || Holds dies to allow accurate production of externally threaded parts || In Black metal cabinet near tailstock, third drawer
| [[File:M300CT90.jpg]] || White squeeze bottle || Consumable || Contains cutting fluid for use when turning, currently filled with CT-90 fluid suitable for use on all metals, use often but sparingly || Tool-tray on Lathe
|-
⚫
| [[File:M300dieholder.jpg]] || Floating Die-holder set || Tool Holding || Holds dies to allow accurate production of externally threaded parts || Shelf under Lathe
|-
|-
| [[File:M300bedprotect.jpg]] || Bed Protector || General || Used to protect the bed from damage if a chuck is dropped while changing and to shield it from abrasive particles when polishing a workpiece || On wall above lathe
| [[File:M300bedprotect.jpg]] || Bed Protector || General || Used to protect the bed from damage if a chuck is dropped while changing and to shield it from abrasive particles when polishing a workpiece || On wall above lathe
Line 97: Line 97:
Parts and upgrades that are planned/Budgeted/Purchased for in the near future
Parts and upgrades that are planned/Budgeted/Purchased for in the near future


* Induction card reader
* 2-Axis DRO
* Machining assistance touchscreen terminal
* Machining assistance touchscreen terminal
* Proper oil drain tap for main gearbox, Steve-R to make


== Lathe Caretakers ==
== Lathe Caretakers ==
Line 109: Line 106:
! Name/Contact !! Induction levels provided !! Notes
! Name/Contact !! Induction levels provided !! Notes
|-
|-
| Steve-R || 1,2,3 ||
| James-M || 1 ||
|-
|-
| Ian-P || 1 || Only does 1-to-1 sessions
| Tim Endean || 1 ||
|-
| Arthur-P || 1 || Currently on haitus, busy being a pirate
|-
| James-M || 1 ||
|}
|}

=== Workshops ===
=== Workshops ===
The following workshops are available that heavily feature the metal lathe
The following workshops are available that heavily feature the metal lathe


* [[workshops/Spinning top|Spinning Top]]


=== Maintainers ===
=== Maintainers ===
Line 127: Line 120:
|-
|-
! Name !! Notes
! Name !! Notes
|-
| [[User:Stever|Steve-R]] ||
|-
|-
| [[User:Jmf|James-M]] ||
| [[User:Jmf|James-M]] ||
Line 138: Line 129:
[[Category:tools]]
[[Category:tools]]


* Make and fit another new coolant line adapter, trying PETg this time to see if that works better [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 22:19, 15 April 2022 (BST)
* Reprint and fit replacement coolant line adapter [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 12:01, 23 March 2022 (UTC)
* Realign tailstock to remove taper [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 18:51, 4 January 2022 (UTC)
* Change oil in main gearbox, open up casing and clean oil galleries, check spindle bearing play (3um) [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 16:13, 10 November 2021 (UTC)
* Fit new 2-axis DRO, Mike-C and [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 16:13, 10 November 2021 (UTC)
* Recut 3-jaw chuck [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 16:03, 8 October 2021 (BST)
* Installed card reader [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 16:09, 29 September 2021 (BST)
* Rebuild 3-jaw chuck [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 16:51, 26 July 2021 (BST)
* Top up main gearbox oil, oil all standard oiling points, clean and re-lube leadscrew and feed rod [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 12:08, 27 May 2021 (BST)
* Top up apron oil [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 18:07, 19 May 2021 (BST)
* Coolant level sensor fitted. [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 19:11, 28 June 2020 (UTC)
* Coolant level sensor fitted. [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 19:11, 28 June 2020 (UTC)
* Deep clean and re-lubricate all ways [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 17:29, 16 May 2020 (UTC)
* Deep clean and re-lubricate all ways [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 17:29, 16 May 2020 (UTC)
Line 147: Line 148:


<gallery mode="packed">
<gallery mode="packed">
File:M300slideshow1.jpg|A spinning top being turned from the [[workshops/Spinning top|spinning top workshop]]
File:M300slideshow1.jpg|A spinning top being turned from the spinning top workshop
File:M300slideshow2.jpg|Turning using the collet chuck
File:M300slideshow2.jpg|Turning using the collet chuck
File:M300slideshow3.jpg|Feedrate table for the lathe, [[Tools/metallathe/induction|level-2 induction]] is needed to use this
File:M300slideshow3.jpg|Feedrate table for the lathe, [[Tools/metallathe/induction|level-2 induction]] is needed to use this
File:Lathe_dro.jpg|The lathe DRO
File:M300slideshow4.jpg|Lee working on his spinning top
File:M300slideshow4.jpg|Lee working on his spinning top
File:M300slideshow5.jpg|The inside of the lathe's screwcutting gearbox
File:M300slideshow5.jpg|The inside of the lathe's screwcutting gearbox
File:Turningbetweencenters.JPG| Turning a long shaft between centers
File:Turningbetweencenters.JPG|Turning a long shaft between centers
File:hardturning.JPG|Turning a hardened steel circular saw blade held on the face-plate using a CBN insert
File:Lampvidthumbnail.jpg|Circular Saw Table Lamp which features the lathe a lot|link=https://www.youtube.com/watch?v=ANH9uDAkPFE
File:Hardturningthumbnail.jpg|Demonstration of turning hardened steel|link=https://www.youtube.com/watch?v=Dj0BQDkcmeo
File:Beforeskimming.jpg|A brake disc before being skimmed
File:Closeup1.jpg|Skimming a cast iron brake rotor with WNMG carbide insert
File:Finishedview.jpg|A finished brake disc fully cleaned up
</gallery>
</gallery>

Latest revision as of 18:43, 30 November 2023

Harrison M300 Light-industrial Metal Lathe

This tool requires induction
Owing to it's dangerous nature, delicate nature, or expense, this tool requires that you be inducted on it's proper handling before use.

Introduction[edit]

Harrison M300 Metalworking Lathe

The Harrison M300 lathe is an educational/Light-duty industrial lathe well suited for our requirements. It has a maximum part diameter of 330mm and a maximum length of 650mm and is designed to work with all standard engineering metals and well as most plastics but please note it is NOT suitable for use with any types of wood because wood fibres are sticky and abrasive so they tend to cause damage to the slideways. Induction is required for all members wanting to use the lathe and this is controlled by a card reader mounted next to the main power switch. The lathe has now also been fitted with a Digital Read-Out (DRO) to make it easier to use, it's still settling in and isn't fully accurate yet but it's usable. The instruction manual for the lathe is available here. The instruction manual for the DRO is here, please do not change the settings.

Current Status[edit]

Date Status Comment
23rd March 2022 Fully Functional Coolant line replaced

Induction levels available[edit]

Induction options are level-1 which covers safe use of the machine and a handful of simple topics suitable for very simple jobs and is available from all trainers, takes about 60 minutes, with a maximum group size of 3 but 1-to-1 will go faster. Level 2 induction which covers a few more topics and is likely to deal with most machining operations that occasional users are likely to need. Level 2 induction takes 2 x 2hr sessions with a maximum group size of 2 although 1-on-1 sessions are available, there may be a small charge for the materials used during training. Level 3 induction which covers most machining operations that are likely to occur even on complex projects as well as some of the more complex maintenance tasks on the lathe. Level 3 induction will take multiple sessions of 3+ hours and is 1-to-1, again there will be a small charge per module for materials used and trainer time.

Some of the inductors also offer workshop sessions that involve completing a specific project rather than general lathe operations, these sessions will include at least a basic induction and usually include some but not all material from other induction levels. Charges and times for these vary, see the workshops page.

Tools currently available[edit]

The lathe is fitted with a Multifix clone quick change toolpost, size A. We have a number of toolholders available for use. If you change a tool, please re-fit the original before putting the toolholder back on the board.

Lathe users with level-1 induction should be using the High-Speed-Steel turning tools as they're cheap, robust and easily re-sharpened, for users with level-2 induction we have the following carbide-insert tooling available

Carbide Tooling available for use by people with level-2 induction
Tool Name Image What's it for? Holder size Insert type (if present)
20mm Boring bar Expanding large and deep holes in work 20mm Boring Bar holder DCMT11T308 or DCMT11T304
12mm Boring bar Expanding smaller holes 20mm standard with 8mm shim CCMT060204
3mm Parting blade Cutting pieces off from stock bars 26mm Parting blade holder GTN3
WNMG Roughing tool Removing a large amount of material rapidly 20mm Standard holder WNMG0804(02/04/06/08)
DCMT Finish tool Fine detail work and surface finishing 20mm standard with 8mm shim DCMT070204

Accessories[edit]

Photo Name Type Condition/Notes Location
3-Jaw self-centring chuck Work Holding Standard chuck for jobs not requiring accurate concentricity On the Lathe usually, spare jaws in the black cabinet by the tailstock
4-Jaw independent chuck Work Holding For holding odd-shaped workpieces or work where accurate concentricity or offsets are needed - MAXIMUM SPEED 1700rpm Shelf under lathe
Collet chuck Work Holding For accurate concentricity on round or hexagon workpieces, suitable for high-speed use and small workpieces. Comes with 12 collets and key Shelf under lathe
Faceplate Work Holding For very large workpieces, MAXIMUM SPEED 1200rpm and possibly much lower depending on workpiece Shelf under lathe
Catch plate Work Holding For turning between centres, maximum speed will depend on workpiece but is usually severely limited. Shelf under lathe
Lathe Dogs Work Holding Used with the Catch plate to drive the work. Three sizes - 1/2", 3/4" and 1". In Black metal cabinet near tailstock, top drawer
Travelling Steady Work holding Stabilizes objects which are thin and long and which have to be parallel-turned. The bolts to attach it to the saddle are duct-taped to it. In Black metal cabinet near tailstock
Fixed Steady Work holding Holds long workpieces in a fixed location for turning operations in the middle of the work. In Black metal cabinet near tailstock
Milling slide Work holding Used when milling small items with a milling cutter mounted in the lathe chuck. Requires mounting holes drilling into cross slide in order to be mounted so not currently usable Red cupboard by fire door
16mm Keyed Drill Chuck on 3MT spindle Tool holding Used in the tailstock to hold drills for boring out workpiece On rack on splashback
13mm Keyless drill chuck on 3MT spindle Tool holding Used in the tailstock to hold drills for boring out workpiece On rack on splashback
10mm Keyed Drill Chuck on 2MT spindle Tool holding Used in the tailstock to hold smaller drills for boring out workpiece In Black metal cabinet near tailstock, top drawer
Live centre on 3MT spindle Work holding Holds the far end of a workpiece steady On rack on splashback
Live centre on 2MT spindle Work holding Similar to the 3MT live centre, but for smaller workpieces In Black metal cabinet near tailstock, top drawer
Dead centre on 2MT spindle Work holding Holds the end of a long workpiece without rotating. Useful for guiding taps and smaller workpieces On rack on splashback
Half dead centre on 2MT spindle Work holding Small dead centre with part of the side ground away to allow a tool to get close to the end of the workpiece On rack on splashback
3MT to 2MT Sleeve Work holding Used to fit 2MT tools into our 3MT tailstock. We have a number of these available. In Black metal cabinet near tailstock, top drawer
Dead Centre on 5MT Sleeve Work holding Used in head for turning between centers in conjunction with catch plate and dogs In Black metal cabinet near tailstock, top drawer
Spring loaded tapping guide Tool holding Assists in accurate starting of taps into concentric holes In Black metal cabinet near tailstock, top drawer
Dial indicator on magnetic Base General For accurately centring work and for general maintenance tasks In Black metal cabinet near tailstock, top drawer
LED lamp on magnetic base General Lighting up work! On lathe
Small red oil can Consumable Contains ISO-68 lubricating oil to maintain the lathe, not to be used as cutting fluid Tool-tray on Lathe
Floating Die-holder set Tool Holding Holds dies to allow accurate production of externally threaded parts In Black metal cabinet near tailstock, third drawer
Bed Protector General Used to protect the bed from damage if a chuck is dropped while changing and to shield it from abrasive particles when polishing a workpiece On wall above lathe

Planned Upgrades[edit]

Parts and upgrades that are planned/Budgeted/Purchased for in the near future

  • Machining assistance touchscreen terminal

Lathe Caretakers[edit]

Inductions[edit]

The following people are able to provide inductions on the metal lathe

Name/Contact Induction levels provided Notes
James-M 1
Tim Endean 1

Workshops[edit]

The following workshops are available that heavily feature the metal lathe


Maintainers[edit]

These are the people who look after and repair the lathe, they're the ones to contact if there's any problems with it

Name Notes
James-M

Recent Changes[edit]

If you make any non-trivial changes to lathe or perform maintenance please note it here, delete records older than 1 yr

  • Make and fit another new coolant line adapter, trying PETg this time to see if that works better Stever (talk) 22:19, 15 April 2022 (BST)
  • Reprint and fit replacement coolant line adapter Stever (talk) 12:01, 23 March 2022 (UTC)
  • Realign tailstock to remove taper Stever (talk) 18:51, 4 January 2022 (UTC)
  • Change oil in main gearbox, open up casing and clean oil galleries, check spindle bearing play (3um) Stever (talk) 16:13, 10 November 2021 (UTC)
  • Fit new 2-axis DRO, Mike-C and Stever (talk) 16:13, 10 November 2021 (UTC)
  • Recut 3-jaw chuck Stever (talk) 16:03, 8 October 2021 (BST)
  • Installed card reader Stever (talk) 16:09, 29 September 2021 (BST)
  • Rebuild 3-jaw chuck Stever (talk) 16:51, 26 July 2021 (BST)
  • Top up main gearbox oil, oil all standard oiling points, clean and re-lube leadscrew and feed rod Stever (talk) 12:08, 27 May 2021 (BST)
  • Top up apron oil Stever (talk) 18:07, 19 May 2021 (BST)
  • Coolant level sensor fitted. Stever (talk) 19:11, 28 June 2020 (UTC)
  • Deep clean and re-lubricate all ways Stever (talk) 17:29, 16 May 2020 (UTC)
  • New apron oil seal fitted Stever (talk) 15:11, 25 October 2019 (UTC)
  • New Multifix toolpost fitted, new tools are on the way - Stever (talk) 17:55, 28 August 2019 (UTC) & JMF

Image Gallery[edit]

Please feel free to add to this gallery if you have interested photos of the Lathe in use.

  • A spinning top being turned from the spinning top workshop

    A spinning top being turned from the spinning top workshop

  • Turning using the collet chuck

    Turning using the collet chuck

  • Feedrate table for the lathe, level-2 induction is needed to use this

    Feedrate table for the lathe, level-2 induction is needed to use this

  • The lathe DRO

    The lathe DRO

  • Lee working on his spinning top

    Lee working on his spinning top

  • The inside of the lathe's screwcutting gearbox

    The inside of the lathe's screwcutting gearbox

  • Turning a long shaft between centers

    Turning a long shaft between centers

  • Turning a hardened steel circular saw blade held on the face-plate using a CBN insert

    Turning a hardened steel circular saw blade held on the face-plate using a CBN insert

  • Circular Saw Table Lamp which features the lathe a lot

    Circular Saw Table Lamp which features the lathe a lot

  • Demonstration of turning hardened steel

    Demonstration of turning hardened steel

  • A brake disc before being skimmed

    A brake disc before being skimmed

  • Skimming a cast iron brake rotor with WNMG carbide insert

    Skimming a cast iron brake rotor with WNMG carbide insert

  • A finished brake disc fully cleaned up

    A finished brake disc fully cleaned up

Retrieved from "https://wiki.rlab.org.uk/wiki/Tools/metallathe?oldid=9395"