Revision as of 06:52, 14 May 2021 (edit) imported>Stever (→‎Level 3) ← Older edit		Revision as of 09:43, 19 May 2021 (edit) (undo) imported>Stever (→‎Module 2A) Newer edit →
Line 190: \|Use of cutting fluids and other lubricants \|\| * Using the 3 types of cutting lubricant, the ~~spray~~liquid, the ~~liquid~~gel, and the ~~gel,~~flood and when each is used, Avoiding fling and mess using the gelled lubricant, using the ~~spray and~~ liquid when deeper penetration is needed to reach cutting faces. Use of proper lubricants for aluminium (the CT-90 is "Universal" and can be used) Using the flood coolant system Line 272: \|Tool Inspection \|\| * Checking the tools with ~~magnifying glass and~~ the inspection microscope ~~upstairs~~, what good and bad looks like on each of the 3 tool types. * Recognising wear and polishing on HSS tools and when it's OK and when the edge had been lost. * Looking for wear or more likely chipping on brazed carbide, the procedure for getting them re-ground if they need it.

Tools/metallathe/induction: Difference between revisions

Tools/metallathe/induction (edit)