Tools/laser: Difference between revisions
Content added Content deleted
imported>Stever |
imported>Stever |
||
Line 34: | Line 34: | ||
| Pine board || Yes || Yes || 18mm || Cut depth varies enormously with timber type/moisture/treatments so 18mm is a max you may never get. |
| Pine board || Yes || Yes || 18mm || Cut depth varies enormously with timber type/moisture/treatments so 18mm is a max you may never get. |
||
|- |
|- |
||
| Mahogany || Yes || |
| Mahogany || Yes(ish) || Yes || 6mm || Very prone to charring and hard to cut, but engraves very nicely |
||
|- |
|- |
||
| Cardboard || Yes || Difficult || N/A || High fire risk, must be cut quite quickly and watched constantly |
| Cardboard || Yes || Difficult || N/A || High fire risk, must be cut quite quickly and watched constantly |