Tools/laser: Difference between revisions
Content added Content deleted
imported>Stever |
imported>Stever |
||
Line 30: | Line 30: | ||
| Polystyrene || Yes || Yes || 8mm || Cuts OK but does tend to leave sticky residue on the bed that will require extensive cleaning |
| Polystyrene || Yes || Yes || 8mm || Cuts OK but does tend to leave sticky residue on the bed that will require extensive cleaning |
||
|- |
|- |
||
| Polypropylene || Yes || Yes || Unknown || |
| Polypropylene || Yes(ish) || Yes || Unknown || Not recommended, very prone to heat-distortion during cutting. Leaves a very sticky and hard to clean residue around the cut and on the nozzle |
||
|- |
|- |
||
| Polycarbonate || No || No || N/A || Polycarbonate is not allowed in the laser owing to terrible cuts and high fire risk |
| Polycarbonate || No || No || N/A || Polycarbonate is not allowed in the laser owing to terrible cuts and high fire risk |