Tools/boxford: Difference between revisions

Line 111:

== Recent Changes ==

* Fit spindle current gauge and readjust the spindle controller for better response and stability [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 17:55, 26 January 2022 (UTC)

* Tighten play on spindle bearings slightly. Seems to be settling down and wearing in OK, Easy-change chuck still performing poorly [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 22:28, 20 September 2021 (BST)

* Increase rapid G0 speed limit to 1200mm/sec on X and Y, increase travel limit on Y to 130mm [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 18:08, 12 September 2021 (BST)

Line 130:

Line 131:

* Fitted new drivers, wiring is a mess that needs redoing. [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 22:01, 27 February 2021 (UTC)

* Adjust gibs on all axis, neaten up wiring and improve star-grounding, re-connect spindle cooling fan. [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 22:30, 21 February 2021 (UTC)

* Phase-1 rewire completed, boxford returned to service. [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 02:12, 25 August 2019 (UTC)

⚫

* ~~Rewire~~ ~~continues~~ ~~but~~ we ~~lost~~ ~~a driver and~~ the ~~bridge~~ ~~rectifier~~ to an ~~unexpected~~ ~~ground-return~~ ~~loop.~~ [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 02:58, 19 ~~August~~ ~~2019~~ (UTC)

* The stepper driver has been repaired, boxford is functional again. [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 10:55, 27 September 2018 (UTC)

* The x-axis stepper driver has failed under test, is being investigated to determine if it can be repaired or replaced [[User:Stever|Stever]] ([[User talk:Stever|talk]]) 20:11, 23 September 2018 (UTC)

== Image Gallery ==