Tools/boxford: Difference between revisions
Content added Content deleted
imported>Stever |
imported>Stever No edit summary |
||
Line 3: | Line 3: | ||
{{thistoolneedsinduction}} |
{{thistoolneedsinduction}} |
||
== Introduction == |
== Introduction == |
||
[[File:Boxford 260vmc 02.jpg|250px|thumb|The Boxford 260 VMC Milling machine]] [[File:Boxfordworkarea.jpg|250px|thumb|The working area of the Boxford 260 VMC Milling machine]]The Boxford 260 VMC is an educational model CNC mill that is in the process of being upgraded with a modern controller and electronics. The CNC milling machine has a maximum travel of 250mm x |
[[File:Boxford 260vmc 02.jpg|250px|thumb|The Boxford 260 VMC Milling machine]] [[File:Boxfordworkarea.jpg|250px|thumb|The working area of the Boxford 260 VMC Milling machine]]The Boxford 260 VMC is an educational model CNC mill that is in the process of being upgraded with a modern controller and electronics. The CNC milling machine has a maximum travel of 250mm x 130mm and a vertical travel of 180mm, the spindle is speed controlled from 100-3000rpm. It's suitable for use with Aluminium, Brass, Mild steel (with caution), stainless steel (very, very slowly) and most Plastics. The Boxford mill requires [[tools/boxford/induction|induction]] before you can use it as it is a complex and challenging to use tool. The Boxford is kept downstairs on the west wall between the drill press and the linisher. The lab does not keep a regular stock of milling cutters, although you might find some around the place from time to time. If you have a specific job in mind then it's recommended that you bring your own tooling, we do this because a clumsy operator can easily break hundreds of pounds worth of tools in a few minutes and it wouldn't be fair to other members for the lab to have to pay for that. At the moment we're recommending a maximum speed of 800mm/sec for travel moves (although speeds up to 1200mm/min are available) and 300mm/sec for cutting moves, although the exact speed you want to use will depend on many factors (see the [[Workshops/boxford|induction]]). The Boxford is protected from damage by [[Prudence|Prudence, the safety goat]]. |
||
__TOC__ |
__TOC__ |
||
Line 22: | Line 22: | ||
X 250mm |
X 250mm |
||
Y |
Y 130mm |
||
Z 180mm |
Z 180mm |
||
Line 32: | Line 32: | ||
| Spindle power || Originally 500W, now limited to more like 250W |
| Spindle power || Originally 500W, now limited to more like 250W |
||
|- |
|- |
||
| Maximum travel speed || 800mm/min recommended, |
| Maximum travel speed || 800mm/min recommended, 1200mm/min allowed |
||
|- |
|- |
||
| Maximum recommended cutting speed || 300mm/min |
| Maximum recommended cutting speed || 300mm/min |