Tools/boxford: Difference between revisions
Content added Content deleted
imported>Stever |
imported>Stever |
||
| Line 52: | Line 52: | ||
|- |
|- |
||
| Spindle Bearings || 45 x 75 x 16 mm bearings (2 required), Originally 6009-2Z-C3 Deep groove |
| Spindle Bearings || 45 x 75 x 16 mm bearings (2 required), Originally 6009-2Z-C3 Deep groove |
||
Replaced with 7009B Angular contact bearings |
Replaced with 7009B-P4 Angular contact bearings |
||
|- |
|- |
||
| Spindle Motor || Lenke 180V DC permanent magnet motor |
| Spindle Motor || Lenke 180V DC permanent magnet motor |
||
| Line 70: | Line 70: | ||
| Stepper Motors|| NEMA34 8-wire steppers that are about 80mm deep, The X and Y Axis motors are unknown, the Z-axis motor is RS part number 180-5291 |
| Stepper Motors|| NEMA34 8-wire steppers that are about 80mm deep, The X and Y Axis motors are unknown, the Z-axis motor is RS part number 180-5291 |
||
|} |
|} |
||
== Planned Upgrades == |
== Planned Upgrades == |
||