imported>Stever |
imported>Stever |
Line 53: |
Line 53: |
|
| Spindle Bearings || 45 x 75 x 16 mm bearings (2 required), Originally 6009-2Z-C3 Deep groove |
|
| Spindle Bearings || 45 x 75 x 16 mm bearings (2 required), Originally 6009-2Z-C3 Deep groove |
|
Replaced with 7009B Angular contact bearings |
|
Replaced with 7009B Angular contact bearings |
|
|
|- |
|
⚫ |
| Spindle Motor || Lenke 180V DC permanent magnet motor |
|
|
|- |
|
⚫ |
| Spindle Driver || Parker Controls 508/00/20/00 12A 180V motor driver |
|
|
|- |
|
⚫ |
| Limit Switches || SIP10-C2 NPN NO AECO V3 Shielded inductive sensors |
|
|
|- |
|
⚫ |
| Stepper PSU || 60V DC 1500W switch mode power supply |
|
|
|- |
|
|
| Air system PSU || RS components 24V 2A DIN rail PSU |
|
|
|- |
|
|
| Logic PSU || RS components 12V 2A DIN rail PSU |
|
|
|- |
|
⚫ |
| Stepper drivers || DM860H 7.2A fan-cooled stepper drivers, set for 4.3A continuous, 5.2A peak, no idle current reduction |
|
|
|- |
|
⚫ |
| Stepper Motors || NEMA34 8-wire steppers that are about 80mm deep, The X and Y Axis motors are unknown, the Z-axis motor is RS part number 180-5291 |
|
|} |
|
|} |
|
|
|
|
|
== Machine Details == |
|
|
* Controller: Custom built smoothieboard made by Richard-I connected to a micro-PC |
|
⚫ |
* Spindle motor: Lenke 180V DC permanent magnet motor |
|
⚫ |
* Spindle Driver : Parker Controls 508/00/20/00 12A 180V motor driver |
|
⚫ |
* Limit Switches : SIP10-C2 NPN NO AECO V3 Shielded inductive sensors |
|
⚫ |
* Stepper PSU : 60V DC 1500W switch mode power supply |
|
⚫ |
* Stepper drivers : DM860H 7.2A fan-cooled stepper drivers, set for 4.3A continuous, 5.2A peak, no idle current reduction |
|
⚫ |
* Stepper Motors : NEMA34 8-wire steppers that are about 80mm deep, The X and Y Axis motors are unknown, the Z-axis motor is RS part number 180-5291 |
|
|
|
|
|
|
== Planned Upgrades == |
|
== Planned Upgrades == |