Tools/boxford: Difference between revisions

Line 38:

| Maximum run time per program || 1 hr, limited by thermals, programs can be divided into <1hr sections will cool-down times between

|}

=== Known Issues ===

* Door interlock switch disconnected (might not want to reconnect)

* Spindle resumes automatically when E-stop is released, proper re-start procedure can deal with this safely but it still shouldn't happen

* Spindle bearings need replacement, killed by too much exposure to sawdust

* Head needs tramming

== Machine Details ==

Line 54:

Line 49:

== Planned Upgrades ==

* Make new front panel

* Make new front panel - Will require linuxCNC upgrade first

* Reinstate touch probe

* Replace controller with MESA 7i76E

* Install LinuxCNC option

* Rebuild spindle

* Rebuild spindle - Bearings need replacement to reduce noise and heating

* New spindle motor and driver

* New spindle motor and driver - To possibly increase max spindle speed

=== Known Issues ===

* Door interlock switch disconnected (might not want to reconnect)

* Spindle resumes automatically when E-stop is released, proper re-start procedure can deal with this safely but it still shouldn't happen

* Spindle bearings need replacement, killed by too much exposure to sawdust

* Head needs tramming

== Boxford Caretakers ==