Tools/bandsaw/induction: Difference between revisions
Content added Content deleted
imported>Stever (→Bandsaw - Level 2: feedback from andy incorporated) |
imported>Stever |
||
| Line 243: | Line 243: | ||
* If using a metal-cutting blade then obviously metal test blocks must be used |
* If using a metal-cutting blade then obviously metal test blocks must be used |
||
* Post on the maintenance section of the bandsaw's wiki page if you've done this other than as routine at a blade change |
* Post on the maintenance section of the bandsaw's wiki page if you've done this other than as routine at a blade change |
||
* Checking blade lead when making difficult/long/thick cuts |
|||
* Using fence clamping immediately after a lead check for especially awkward cuts on large objects |
|||
|| Correcting blade lead will result in neater cuts and longer blade life. |
|| Correcting blade lead will result in neater cuts and longer blade life. |
||
|- |
|- |
||