Tools/TIG/induction: Difference between revisions

Level 1 induction in intended to cover the basics of how to use the [[Tools/TIG|TIG welder]], it covers basic safety information and how to use the welder effectively on mild and stainless steel in positions 1G and 2G/F. It is strongly recommended that people undertake [[Tools/mig|MIG]] [[Tools/mig/induction|induction]] and practice it thoroughly before attempting TIG welding, that said you can start welding straight away with TIG but it's likely to take considerably longer to develop the required skill to use it effectively. People undertaking TIG induction need to have overalls or other non-flammable clothing that covers all exposed skin except for head and hands. Wear stout shoes or boots, no open shoes allowed. If you have any metal you'd like to practice on then please bring it with you so long as it's plain steel with no galvanized coating or paint but if you don't have any then we usually have suitable scrap around to practice on. There's no charge specifically for the level 1 induction but normal welder usage charges apply, you should expect it to cost around £510 for the induction and a bit more if you spend some time practicing afterwards which is strongly recommended. This induction ismay estimatedtakes up to take 23 hours depending on skill. Please remember that what you might have seen on youtube/instagram is people showing off their very best welds that may have taken years of practice and multiple attempts to achieve, you will NOT be getting results like that after just an induction. The goal for induction is to be able to use the TIG welding without being a danger to yourself or others, it's not even to achieve structurally sound welds, TIG welding is a high-skilled process and it takes a minimum of hundreds of hours of practice to get photograph-worthy results like that.