Anonymous user
Tools/TIG/induction: Difference between revisions
→TIG welder induction (TIG Mode) Level 1
imported>Stever |
imported>Stever |
||
Line 278:
* Holding the tip of the filler rod near the puddle so that it's shielded, but not so close it melts
* Dipping the tip of the filler rod into the nose of the puddle and quickly back out again
** Contact with the puddle melts the filler rod, not the arc
* The puddle will rise every time you dip the rod so be careful it doesn't touch the electrode
* May be helpful to use stepped movements on the electrode
|