73
edits
imported>Stever (→TIG welder induction (TIG Mode) Level 1: link fix) |
m (1 revision imported) |
||
(8 intermediate revisions by 2 users not shown) | |||
Line 2:
<div id="level1"></div>
== TIG welder induction (TIG Mode) Level 1 ==
Level 1 induction in intended to cover the basics of how to use the [[Tools/TIG|TIG welder]], it covers basic safety information and how to use the welder effectively on mild and stainless steel in positions 1G and 2G/F
{| class="wikitable"
Line 19:
* Forge - V.V.Slow, good for big flat welds, high-skilled
* Spot - Tiny spot welds for joining plate, low-skilled
* Gas - Gas welding is most similar to TIG but we don't have it at rLab for safety reasons
|-
| Safety ||
Line 28 ⟶ 29:
** Using an auto-darkening welding mask
** Suitable settings on mask (9-11, 12 maybe - start at 10 and adjust)
*** Testing visors before use
*** Any setting will save your vision, you're just adjusting for best visibility
** Shouting "Eyes"
* PPE - Overalls, stout shoes, gloves, mask, dust protection when needed, Cover all exposed skin or you'll regret it!
Line 99 ⟶ 102:
* Machine strikes arc between the work and a non-consumable tungsten electrode, melting a pool of metal
** TIG welding is the most similar welding process to soldering but there's still an important difference. In TIG welding you're melting the base material and allowing it to flow together, not only adding material on top
* Filler wire is added manually while moving the torch forming a weld bead that joins the metals
* Gas shields the weld pool and the tungsten from air exposure
Line 120 ⟶ 124:
* Gas bottle
** Type of gas and why
** Basic safety for the Albee bottles
|| Covering what all the parts are called and do
|-
Line 142 ⟶ 144:
** Types and their suitability
*** 2% Thoriated (Red Tip) - DC Welding on steels only, radiation danger
*** 2% Lanthanated (Blue Tip) - Universal, can be used on all metals and polarities, recommended for normal use
*** 2% Ceriated (Grey Tip) - DC use on thin materials, excellent arc stability at low powers
Line 159 ⟶ 160:
* Welder
** Checking correct polarity, making sure earth lead is connected to work
** Check tightness of connectors, they'll catch fire if they're loose!
** Plug in welder but don't turn on yet. Directly plug in, never use extension leads
* Gas
** Check remaining gas level
** Setting suitable gas flow rate using
▲** Setting suitable gas flow rate using both bottles using the table on the welder, but consider situation of weld
||
Suitable setup and settings for executing the weld
Line 179 ⟶ 177:
** Pulse mode
*** Useful sometimes but details not covered in level-1, leave this turned off
** Purge - Used to clear air from the lines
** Power and overheat lights - Duty cycle, 100%@90A, 60%@115A, 20%@200A but max is about 120A on 13A plug
** Process
Line 213 ⟶ 211:
* Overalls are required for UV protection
* We have special TIG gloves that are much lighter and less stiff than normal welding gloves which can be used because TIG doesn't generate very much radiant heat or spatter. These gloves are made of goatskin or pigskin and are specifically reserved for TIG welding and must not be used for anything else
* Welding masks will protect your face and eyes from the UV light
* Depending on the welding current you may want to use shade 9-12 on the welding helmet. All settings will save your vision, you're just adjusting for best visibility. If you're used to MIG/MMA then go one setting darker than you normally would for this current. Make sure the mask is clean, dirty lenses will make this a lot harder than it needs to be.▼
** Test the visor before use
** Change the cover sheets on them if necessary, report it if we're out of properly fitting replacements
▲** Depending on the welding current you may want to use shade 9-12 on the welding helmet. All settings will save your vision, you're just adjusting for best visibility. If you're used to MIG/MMA then go one setting darker than you normally would for this current
* You may see people online welding without overalls or even without gloves. They can get away with this because of the low-spatter nature of TIG welding. DO NOT DO THIS - They are probably wearing SPF-1000 sunblock and have developed a tolerance over years, they'll still probably wind up getting skin cancer from it! Cover all exposed skin at all times while welding.
|| Using the right PPE for TIG welding
Line 262 ⟶ 263:
| Travel too fast || Gaps/thin spots in bead || Fast movement has pulled the bead forward faster than the welder could melt the material
|}
||
|-
|
|-
| Laying a bead using filler ||
Line 278 ⟶ 279:
* Holding the tip of the filler rod near the puddle so that it's shielded, but not so close it melts
* Dipping the tip of the filler rod into the nose of the puddle and quickly back out again
** Contact with the puddle melts the filler rod, not the arc
* The puddle will rise every time you dip the rod so be careful it doesn't touch the electrode
* May be helpful to use stepped movements on the electrode
Line 284 ⟶ 286:
[Inductee practices laying a filler bead]
|| Laying a bead while using filler
|}
Depending on how things are going and the amount of time available the induction can stop here and allow the inductees to practice welding until they're comfortable with reflow and filler beads. The induction can resume on another day to complete the training on how to actually join metal together. If so the "Shutting down and cleaning up" section below should also be covered.
{| class="wikitable"
|-
! Topic !! Detailed contents !! Rationale
|-
| Butt joints ||
Line 346 ⟶ 356:
== TIG welder induction (TIG Mode) Level 2 ==
Level 2 TIG induction is intended to allow people to convert from working on steel to more complex tasks.
* Working on and welding aluminium, magnesium, silicon alloys
Line 371 ⟶ 381:
* When and how to use back-purge (we don't have any fittings for it)
[[Category:inductions]]
|