Tools/PrusaXL/induction: Difference between revisions
m
added build sheets
No edit summary |
m (added build sheets) |
||
Line 9:
Members who are already inducted on the Ultimaker 2+ 3D printers may use the Prusa XL if they consider themselves competent after reading the comprehensive user [https://www.prusa3d.com/downloads/manual/prusa3d_manual_xl_104_en.pdf Handbook]. The Prusa is significantly different to the Ultimaker 2+ and uses a different slicer, so do expect a learning time of a few hours.
Training will be offered for members who would like help to use the Prusa XL and PrusaSlicer. This may be in multiple sessions especially for multicolored printing. Please request this training using Discord inductions-requests.
== Things which should be covered in the induction ==
Line 18 ⟶ 17:
** The inductee should be aware of some of the more important settings - material, layer height, support.
** NB: There are far too many settings to explain even a fraction of them in the induction
** NB: Nozzle sizes: PrusaXL has only 0.4mm
* Loading filaments - take the inductee through process
* Build sheets, smooth and textured, installation, part removal and cleaning
* NB: PrusaXL uses 1.75mm diameter filament, [[Tools/ultimaker]] use 3mm filament. They are not compatible, be careful not to try to use the wrong type.
* Which type of filaments are ok to use:
| |||