Tools/PrusaXL/induction: Difference between revisions
Content added Content deleted
No edit summary |
|||
| Line 16: | Line 16: | ||
* Anything that is covered in the [[Tools/ultimaker/induction]] with notes about how it is different |
* Anything that is covered in the [[Tools/ultimaker/induction]] with notes about how it is different |
||
* The inductee should prepare a simple, small, single material model in Prusaslicer, slice it, load a filament, and print it (this is the same as we do on the Ultimaker, except using Cura) |
* The inductee should prepare a simple, small, single material model in Prusaslicer, slice it, load a filament, and print it (this is the same as we do on the Ultimaker, except using Cura) |
||
** The inductee should be aware of some of the more important settings - material, layer height, support. |
|||
** NB: There are far too many settings to explain even a fraction of them in the induction |
|||
** NB: Nozzle sizes: PrusaXL has only 0.4mm nozzle and will probably only ever have them. The Ultimakers have 0.4 or 0.6 available. |
|||
* Loading filaments - take the inductee through process |
* Loading filaments - take the inductee through process |
||
* NB: PrusaXL uses 1.75mm diameter filament, [[Tools/ultimaker]] use 3mm filament. They are not compatible, be careful not to try to use the wrong type. |
* NB: PrusaXL uses 1.75mm diameter filament, [[Tools/ultimaker]] use 3mm filament. They are not compatible, be careful not to try to use the wrong type. |
||