Tools/HotWireFoamCutter: Difference between revisions

| Built in mitre || For adjusting angles on the Y-Z plane. || Unscrew the knob on the arm of the foam cutter, and turn to the desired angle, rescrew.

| Y Fence || A fence that sets the maximum distance the foam can move in the Y axis. || Unscrew the knobs on either end of the fence, slide to the desired position, rescrew.

| Mitre Fence || A fence that sets the maximum distance the foam can move in the X axis, and an angle at which it can move on the X-Y plane. || Unscrew the knob on the protractor and adjust to the appropriate angle, rescrew. Then unscrew the two knobs on the rail and adjust the fence distance, rescrew.

| Circle Jig || Guides the cutting of perfect circles and cones || Unscrew jig and slide to the desired distance from the wire. Mark rotation center on foam. Uncover pin and place into marked center.