Anonymous user
Tools/boxford: Difference between revisions
no edit summary
imported>Stever |
imported>Stever No edit summary |
||
Line 53:
| Spindle Bearings || 45 x 75 x 16 mm bearings (2 required), Originally 6009-2Z-C3 Deep groove
Replaced with 7009B Angular contact bearings
|-
|-
|-
|-
|-
| Air system PSU || RS components 24V 2A DIN rail PSU
|-
| Logic PSU || RS components 12V 2A DIN rail PSU
|-
|-
|}
▲* Spindle motor: Lenke 180V DC permanent magnet motor
▲* Spindle Driver: Parker Controls 508/00/20/00 12A 180V motor driver
▲* Limit Switches: SIP10-C2 NPN NO AECO V3 Shielded inductive sensors
▲* Stepper PSU: 60V DC 1500W switch mode power supply
▲* Stepper drivers : DM860H 7.2A fan-cooled stepper drivers, set for 4.3A continuous, 5.2A peak, no idle current reduction
▲* Stepper Motors: NEMA34 8-wire steppers that are about 80mm deep, The X and Y Axis motors are unknown, the Z-axis motor is RS part number 180-5291
== Planned Upgrades ==
|