Hackspaceinduction: Difference between revisions
→In small machine room
Line 309:
* You will need to take training on the laser cutter before you can use it. This is in part to protect what is an expensive piece of equipment, but also because it is a fire hazard – it burns through things with a laser-beam
* Please do not leave the laser cutters unattended when they are working. It can catch fire.
* We have had few fires in the laser cutter now. Fortunately we have the skills required to repair it, but you will not make yourself popular with other members if you do set it alight.
* Our first preference is for you to use the Fire Blanket before the Fire Extinguisher to put out the flames
* The perspex lid absorbs any scattered laser light but please be aware that there is a gap at the front - please resist the temptation, and prevent others, from peering through the gap
* It is essential that the machine is cleaned, by wiping the blades with the wipes and removing any debris, after use as this significantly reduced the risk of fire
=== Main room upstairs ===
| |||