Hackspaceinduction: Difference between revisions
→Sewing machines, remote controls
Line 299:
** You turn it on, set the power, and set the run time. Try to avoid using power setting 3 as it makes the floor upstairs shake! It's fine, and recommended, to leave it running with the timer set when you leave so it can continue clearing dust out of the air after you're finished.
* If you are the last to leave, please ensure that the tools are powered down, and the doors are locked before leaving.
* The roller door should be bolted with the chain secured to the hook
* The fire exit should be closed
* The loading bay light switch is next to the e-stop next to the bandsaw
* The only lights that you should see are the LEDs on the power tool battery chargers on the back wall, and the access control unit off the bandsaw
=== In small machine room ===
| |||