Tools/ultimaker
From rLab Wiki
Ultimaker 2+ 3D Printer
This page has been noted as requiring attention to bring it up to the basic standard as per the guidance
Please remove this tag once this page has been improved that standard
 |
| Owing to it's dangerous nature, delicate nature, or expense, this tool requires that you be inducted on it's proper handling before use. |
Introduction
The manual for the 3D printer is here.
Contents
Current Status
| Date | Status | Comment |
|---|---|---|
| 28th September 2018 | Functional | Printer is working |
Planned Upgrades
Parts and upgrades that are planned/Budgeted/Purchased for in the near future
Ultimaker 2+ Caretakers
Inductions
The following people are able to provide inductions on the Ultimaker 2+
| Name/Contact | Notes |
|---|---|
| Tony-S |
Maintainers
These are the people who look after and repair the Ultimaker 2+, they're the ones to contact if there's any problems with it
| Name | Notes |
|---|---|
| Steve-R | In reading around 50% of the time, fast response if in reading |
| Rupert-E | |
| Tony- S |
Recent Changes
If you make any non-trivial changes to the Ultimaker 2+ or perform maintenance please note it here, delete records older than 1 yr
