Tools/ultimaker
From rLab Wiki
Ultimaker 2+ 3D Printer
This page has been noted as requiring attention to bring it up to the basic standard as per the guidance
Please remove this tag once this page has been improved that standard
Introduction
Placeholder Page.
Contents
Current Status
| Date | Status | Comment |
|---|---|---|
| 10th September 2018 | Functional with cautions | Printer is working but unattended use is not recommended owing to an issue with the head cooling fan - replacement parts are on order. |
Planned Upgrades
Parts and upgrades that are planned/Budgeted/Purchased for in the near future
Ultimaker 2+ Caretakers
Inductions
The following people are able to provide inductions on the Ultimaker 2+
| Name/Contact | Notes |
|---|---|
| Tony-S |
Maintainers
These are the people who look after and repair the Ultimaker 2+, they're the ones to contact if there's any problems with it
| Name | Notes |
|---|---|
| Steve-R | In reading around 50% of the time, fast response if in reading |
Recent Changes
If you make any non-trivial changes to the Ultimaker 2+ or perform maintenance please note it here, delete records older than 1 yr
