Ultimaker 2+ 3D Printer
This page has been noted as requiring attention to bring it up to the basic standard as per the guidance
Please remove this tag once this page has been improved that standard
|Owing to it's dangerous nature, delicate nature, or expense, this tool requires that you be inducted on it's proper handling before use.|
Our Ultimaker 2+ 3D printer is a pro-sumer level 3D printer that has a build volume of approximately 200mm x 200 mm x 200mm, it's head can reach 260C and the bed up to 110C which allows us to print in a wide variety of materials including PLA,ABS,HIPS,TPU,ASA,PVA,PVB and Nylon. There is a charge for using the 3D printer which depends on the material used and the weight of the 3D print in question, all the materials in the lab are labelled with a price per gram and there's a 50p minimum charge. Use-charges for the 3D printer should go in the main room honesty pot by the door. For commercial use these charges are doubled.
The manual for the 3D printer is here.
|28th September 2018||Functional||Printer is working|
Parts and upgrades that are planned/Budgeted/Purchased for in the near future
- No changes are planned to the 3D printer
Ultimaker 2+ Caretakers
The following people are able to provide inductions on the Ultimaker 2+
These are the people who look after and repair the Ultimaker 2+, they're the ones to contact if there's any problems with it
|Steve-R||In reading around 50% of the time, fast response if in reading|
If you make any non-trivial changes to the Ultimaker 2+ or perform maintenance please note it here, delete records older than 1 yr